Equipment
The Unishaker D-O - Digital Orbital of Uniscience provides smooth and quiet motions for mixing in culture dishes, flasks, and beakers.
Features
- Easy-to-read backlit LCD digital displays for speed and timer
- Maximum load 2.5Kg/5.5Lbs
- Wide range of platforms options for culture flasks, flasks, etc. (Sold separately)
- 100-800RPM shaking speed range
- 4mm orbital action
- Cold room and incubator compatible
- Multi-voltage
- Timer or continuous operation
- 1-1199 minutes timer
- Independent LCD digital displays for shaking speed and timer function
- Free software for PC control & data logging
- cTUVus approved
- CE Marked
Specifications
- Shaking action: Unishaker D-O - Digital Orbital
- Speed range: 100-800RPM
- Timer : 1 - 1199 minutes
- Orbit diameter: 4mm
- Maximum load: 2.5/Kg/5.5Lbs
- Operating temperature range: +4 - 40°C
- Maximum humidity: 80%
- Plate dimensions: 9 x 11 inches
- Overall dimensions: 17W x 12D x 5H inches
- Weight: 19Lbs
- Electrical supply: 100-240V, 50/60Hz, 30W
Does not include a universal flask platform.
Please order accessories separately
Chilling/Heating dry bath incubator, with temperature range, is from 0~100°C. The UNI-E132 is used for loading and storing samples, enzymatic reactions, and molecular cloning experiments. Also, it unit has a modular design of blocks to accommodate various sample tubes (0.2, 0.5, 1.5, or 2mL) or 96-well plates.
Features
- Chilling/heating dry bath incubator;
- Modular design of blocks, and mix and match tubes from 0,2mL to 50mL and accommodates 96 well plates and slides;
- Small footprint, can work in a hood, or lab automation systems;
- Fast chilling/heating rate, precise temperature control
- Clean and maintenance-free
Specifications
- Temperature range: 0 ~100°C
- Display precision: 0.1°C
- Temperature precision: +/- 0.5°C
- Temperature evenness: +/-0.5°C
- Average heating rate from 16°C to 60°C: 8°C/min
- Average chilling rate from 60°C to 16°C: 3°C/min
- Average heating rate from 25°C to 16°C: 1.5°C/min
- Operation ambient temperature: 8~30°C
- Power supply: 12V DC, 5A
- Dimensions: 185 x 185 x 90mm
- Working area dimensions: 108 x 72mm
- Net weight: 1.4 kgs
- Accessories: Heat Block sold separately
Packing: 1 Unit per box
Cryolys Evolution is a patented cooling system compatible with Precellys Evolution. It prevents thermo-sensitive samples from heat degradation during the homogenization process.
The Cryolys Evolution is the cooling system specially developed for Precellys Evolution tissue Homogenizer.
Based on dry ice sublimation, it enhances the efficiency of molecular extraction, resulting in premium quality analysis, maintaining the desired temperature between 0 and 10°C before and during the homogenization.
The Precellys Evolution tissue Homogenizer software monitors the temperature for fully accurate results. It allows an optimal protection of the sensitive molecules from heat degradation. Cryolys Evolution is the ideal solution when working on native state thermo-sensitive molecules such as active RNA, siRNA, metabolites, enzymes, proteins while getting a high yield extraction.
Watch Cryolys Evolution in action, the most efficient cooling unit!
- Efficient cooling: before, during, and after processing
- No need for compressed air or power supply
- Accurate temperature monitored by Precellys® Evolution software
- Minimal bench space
Capacity:
- 1,5kg/3,3lb of dry ice
Space requirement:
- Heigh over bench: 70cm
- Depth of the bench: 70cm
Dry ice consumption:
- 1,5kg/3,3lb for 30 min (run time)
Weight:
- Full unit: 2,6kg/5,7lb
- Detachable cooling module: 1,3kg/2,8lb
Dimensions:
- Length: 335mm
- Width: 335mm
- Height: 100mm
Requirement:
- Unit plugged to a Precellys Evolution
Noise:
- <60dB
Norms:
- CE
Catalog number:
- EQ05648-300-RD001.0
The Cryolys technology presents two main features:
1- The cooling patented technology of Cryolys Evolution is based on the cold generated during dry ice sublimation by ambient air without frost apparition. The ambient airflow in contact with dry ice is getting immediately cooled and is injected in the tubes area.
2- This airflow is adjusted depending on the desired temperature and the monitored temperature ensuring protocol’s accuracy and therefore fragile molecules protection during the homogenization process.
Benefits
Easy to install:
- Powered and controlled by Precellys Evolution, no compressed air required
Easy to use:
- Precellys Evolution software automatically monitors the protocol run
Fast and accurate:
- Target temperature reached in less than 2minutes and fully monitored
Precellys Evolution is the most advanced homogenizer combining high efficiency and versatility for all sample preparation needs.
Precellys Evolution is the universal tissue homogenizer combining high flexibility and high efficiency for either routine or R&D projects.
Especially designed for L3 laboratories, the Precellys Evolution is based on 10 years of sample preparation expertise. It offers optimal robustness and safety. The Precellys Evolution possesses a unique automatic tube locking system – a real push-and-play system.
The Precellys Evolution can process five different sizes of tubes (0.3mL in well-plate format, 0.5, 2, 7 and 15mL) and up to 24 tubes simultaneously.
Its flexibility and high efficiency give users the ability to grind, homogenize or lyse any type of soft or hard sample from animal, human, plant or microorganism sources in seconds.
Watch Precellys Evolution – the most efficient and flexible homogenizer – in action!
Genclis SAS is a CRO mainly working on food samples. The aim of this application is to extract proteins recognized by IgE antibodies from allergic patients. The challenge is to extract protein with the best possible quality. The Precellys Evolution extracts high quality proteins in large quantities from dry food samples. Moreover, the capacity to process 6 x 15mL tubes is a real advantage and saves time.
Capacity:
- From 8 to 96 wells, 300µL
- From 1 to 24 tubes, 2mL/0.5mL
- From 1 to 12 tubes, 7mL
- From 1 to 6 tubes, 15mL
Speed range:
- From 4,500 rpm to 10,000 rpm (increment by 100 rpm)
Locking system:
- Automatic tubes locking system – patented
Programs:
- The software allows users to save an unlimited number of protocols
Number of cycles:
- up to 10
Cycles time:
- up to 90sec (increment by 1sec)
Weight:
- 60lb / 27kg
Dimensions:
- L: 378mm, W: 515mm, H: 400mm (632mm with open lid)
Power requirement:
- 90 – 250VAC / 50-60 Hz Power: 1 kVA
Noise:
- Less than 70 dB
Norms:
- CE and CFR 47 part 15 certified
Catalogue number:
- EQ02520-300-RD000.0
Benefits
Efficiency on every sample:
- Up to 10,000 rpm to process and standardize any sample preparation in seconds. Even the hardest samples such as hair, teeth and bones can be fully ground in a short period of time.
Easy handling:
- The innovative and patented automatic tube locking system allows for easy handling of the Precellys Evolution without advanced training
Best life time:
- The high quality manufacturing of the Precellys Evolution drastically reduces the need for maintenance and additional expenditure over the years – The Precellys Evolution is made in France
Adapted to any type of sample:
- The high flexibility of the Precellys Evolution, which is capable of handling four sizes of tube (0.5, 2, 7 and 15 mL), makes it the perfect tool when processing samples of different sizes, weight or volume.
Precellys technology presents two main features:
1- The 8-figure 3D-motion (multi-directional) movement of the tubes. The same high level of energy given to the beads inside each tube ensures equal homogenization efficiency for all processed samples (up to 24 at once). Thanks to this complex movement, the Precellys Evolution can disrupt any type of sample (even the hardest) in seconds with perfect reproducibility while limiting heat generation.
2- The patented locking vacuum system of the tubes during the process. The Press’n block system saves time and energy. It makes it easier to handle equipment and secures the tubes before the grinding process.
Accessories
- 7mL holder pack for Precellys Evolution. This option can use up to 12 x 7mL tubes in the Precellys Evolution. It contains one tube holder and one blocking plate Cat. No.: SP02520-810-NC010.0
- 15mL holder pack for Precellys Evolution. This option can use up to 6 x 15mL tubes in the Precellys Evolution. It contains one tube holder and one blocking plate Cat. No.: SP02520-810-NC011.0
- 7mL rack Specific rack to handle 12 x 7mL tubes at once
- Centrifuge adaptor for 7mL tubes Specific adaptor to put 7mL tubes in a centrifuge instead of 15mL Falcon tubes
Digtor 22R
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
Benchtop centrifuge with large capacity and high perShapence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angle fixed and swing out. It has more than 50 different sets of adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high speed equipment, resulting in a routine use centrifuge with some specifications characteristic of superior level models. Its colour TFT touch screen offers perShapence that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.
The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and the assurance that no parameter is uncontrolled.
Features
TFT color touch screen, visible from more than 3 m.:
- Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing.
- Automatic disconnection for energy saving up to 8 h., with deactivation option.
Cooling
- Remains the refrigeration after centrifugation process.
- Precooling program with rotor spinning and temperature selectable.
- Guarantee 4 °C at maximum RPM.
- Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
- Temperature sensor inside the chamber.
- Gas R 449A HFO (CFC free).
Standards and Directives
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Versions
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
Z max Advisable(Hz) | |||
| CE 189 | 720 | 805 | 390 | 95 | 220-230 | 50-60 | 1050 | <|0,446| |
| CE 190 | 720 | 805 | 390 | 95 | 110-120 | 50-60 | 1050 | <|0,446| |
Comparable Rotors
12 place rotor kit with cover, 1.5/2ml x 12, 15000rpm
The centrifuge refrigerated Digicen 21R can reach up to 24.959 xg with a wide range of rotors:
- Swing out rotors, with a max volume of 4 x 100 ml which can fit several sets of adapters for tubes with or without caps, microtubes, microplates.
- Angle fixed low speed for routine purposes.
- Angle fixed high speed from microtubes to 50 ml conical tubes.
The LCD screen showing the selectable values like time, RPM, RCF, temperature, and braking time as well as graphics for lid open, progress bar, and acoustic signals for better control of the process by the operator.
The Powerful refrigeration system, enhanced by the pre-cooling program, keep the samples at stable and controlled temperature, avoiding sample temperature fluctuations at introducing into the device.
Stabilizing sample preparation.
User Friendliness
- LCD screen shown RPM/RCF (on steps 100 RPM/10xg),time, temperature (1°C steps) and acceleration/deceleration (1 second steps).
- Intuitive handling through the start, stop the short spin and lid keys.
- Rotor list on memory.
- Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
- Short spin key with speed adjustable.
- Automatic rotor recognition.
- Acceleration and braking are selectable by the operator.
- 15 memories and pre-cooling program.
- Lid latch lock.
- Microprocessor controlled.
- Option: free or locked adjustment of RPM/RCF along the run.
Features
- Induction motor maintenance-free
- Max. capacity 4 x 100 ml.
- Speed, up to 24.959 xg/16.500 RPM.
- Quiet: noise level < 60 dB.
Safety
- Lid locking and holding.
- Imbalance switch off.
- Manual overriding.
- Chamber of centrifugation in stainless steel.
- Viewing and calibration port in the lid.
- Several messages keep the operator informed about the device situation.
- Guard ring between the chamber of centrifugation and the housing.
- Lid dropping protection.
Cooling
- Precooling program with rotor spinning and temperature selectable by the operator.
- 4°C at Max speed as higher.
- Temperature range -20°C (-4 °F) to 40°C (104 °F)
- Temperature sensor inside the chamber, gas R 404A HFC.
- Standards and EC Directives
EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Regulation: 1005/2009 & 842/2006.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.
Versions
| Code | Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
Z max Advisable(Hz) | ||
| CE 113 | 590 | 680 | 320 | 67 | 220-240 | 50-60 | 700 | <|0.446| |
| CE 119 | 590 | 680 | 320 | 67 | 110-120 | 50-60 | 700 | <|0.446| |
Accessories
The centrifuge Digicen 21 highlights its versatility among the universal centrifuges and it’s provided of:
Swing out rotors for max 4 x 100 ml for tubes, microplates as well as microtubes.
Angle fixed low speed up to 24 tubes of 15ml.
Angle fixed high speed for microtubes up to 50 ml conical.
It´s controlled through an LCD screen showing centrifugation values like time, RPM/RCF, as well as braking time, graphic for the open lid, progress bar, messages, and acoustic signals for error or end of the program, which provides the user the process monitoring.
Thinking on centrifugation.
User Friendliness
- LCD screen shown RPM/RCF (on steps 100 RPM/10xg),time, temperature (1°C steps) and acceleration/deceleration (1 second steps).
- Intuitive handling through the start, stop short spin, and lid keys.
- Rotor list on memory.
- Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
- Short spin key with speed adjustable.
- Automatic rotor recognition.
- Progressive acceleration and braking are selectable by operator up to 175 ramps.
- 16 memories.
- Automatic open lid (non-refrigerated)
- Lid latch lock.
- Microprocessor controlled.
- Option: free or locked adjustment of RPM/RCF along the run.
Feature
- Induction motor maintenance-free
- Max. capacity. 4 x 100 ml.
- Speed, up to 24.959 xg/16.500 RPM
- Quiet: noise level < 60 dB.
Safety
- Lid locking and holding.
- Imbalance switch off.
- Manual overriding.
- Chamber of centrifugation in stainless steel.
- Viewing and calibration port in the lid.
- Several messages keep the operator informed about the device situation.
- Guard ring between the chamber of centrifugation and the housing.
- Lid dropping protection.
- Standards and EC Directives
EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.
Versions
| Code | Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frequency (Hz) |
Consumption (W) |
||
| CE 110 | 410 | 530 | 320 | 36 | 220-240 | 50-60 | 280 |
| CE 116 | 410 | 530 | 320 | 36 | 110-120 | 50-60 | 280 |
Accessories
Digtor 22
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
Benchtop centrifuge with large capacity and high perShapence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angle fixed and swing out. It has more than 50 different sets of adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high speed equipment, resulting in a routine use centrifuge with some specifications characteristic of superior level models. Its colour TFT touch screen offers perShapence that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.
The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and the assurance that no parameter is uncontrolled.
Features
TFT color touch screen, visible from more than 3 m.:
- Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing.
- Automatic disconnection for energy saving up to 8 h., with deactivation option.
Standards
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Versions
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
|||
| CE 187 | 540 | 650 | 390 | 50 | 220-230 | 50-60 | 1020 |
| CE 188 | 540 | 650 | 390 | 50 | 110-120 | 50-60 | 1020 |
Comparable Rotors
Dilitcen 22
Max. capacity: 4 x 1.000 ml.
Max. speed: 21.948 xg / 14.300 RPM
The largest of our benchtop machines, with a capacity of up to 4 litres and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples so as to balance the load and for easy identification. It has a wide range of accessories with capacity for four 1.000 ml. bottles, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.
Its colour TFT touch screen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled and maintaining the process at all times.
Features
TFT color touch screen, visible from more than 3 m.:
- Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing.
- Automatic disconnection for energy saving up to 8 h., with deactivation option.
Standards
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Standards
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
|||
| CE 206 | 540 | 650 | 390 | 50 | 220-230 | 50-60 | 1020 |
| CE 207 | 540 | 650 | 390 | 50 | 110-120 | 50-60 | 1020 |
Compatible Rotors
Tissue Culture Flask Platform (13 x 12 inches) with anti-slip surface for culture flasks etc
The Uniscience Homogenizer can rapidly homogenize, disperse, and emulsify samples in 0.1-50ml of liquid or 1-250ml depending on the generating probe. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process.
- Ideal for mixing, emulsification, shredding, or chopping
- Practical answer for small samples
- Easy to hold and lightweight for one-hand operation
- Generators are made of 316L Stainless Steel with PTFE bushings
- Autoclavable stainless steel shafts. Inert to aggressive solutions
- All shafts are interchangeable shafts and are easily removed for cleanup
- High-speed motor. Speed control from 8,000 to 30,000 RPM
- Suitable for solvents & abrasive substances
Specifications
Speed range: 8,000 - 30,000 RPM
Sample volume range: 0.1 - 50ml
Speed control: 6 position control dial
Motor type: Universal motor, 130 Watt
Fineness: Suspensions & Emulsion 10-15 & 1-10 um
Noise emission: < 54 dB(A) at 30,000 rpm
Dimensions: 2.5L x 2.5W x 8H inches (drive only)
Weight: 18lbs (with stand) 1.5lbs (drive only)
Voltage: 110Volts, 60Hz
- Ideal for mixing, emulsification, shredding, or chopping
- Practical answer for small samples
- Easy to hold and lightweight for one-hand operation
- Generators are made of 316L Stainless Steel with PTFE bushings
- Autoclavable stainless steel shafts. Inert to aggressive solutions
- All shafts are interchangeable shafts and are easily removed for cleanup
- High-speed motor. Speed control from 8,000 to 30,000 RPM
- Suitable for solvents & abrasive substances
Specifications
Speed range: 8,000 - 30,000 RPM
Sample volume range: 0.1 - 50ml
Speed control: 6 position control dial
Motor type: Universal motor, 130 Watt
Fineness: Suspensions & Emulsion 10-15 & 1-10 um
Noise emission: < 54 dB(A) at 30,000 rpm
Dimensions: 2.5L x 2.5W x 8H inches (drive only)
Weight: 18lbs (with stand) 1.5lbs (drive only)
Voltage: 110Volts, 60Hz
Interchangeable blocks provide to configure a system to exactly meet your research needs. The range of configurations holds 1, 2, or 4 interchangeable modular blocks which can hold a variety of tube sizes.
Available for tubes from 0.5ml
Interchangeable blocks provide to configure a system to exactly meet your research needs. The range of configurations holds 1, 2, or 4 interchangeable modular blocks which can hold a variety of tube sizes.
Available for tubes from 0.2ml
Interchangeable blocks provide to configure a system to exactly meet your research needs. The range of configurations holds 1, 2, or 4 interchangeable modular blocks which can hold a variety of tube sizes.
Available for tubes from 50ml