Equipment - Liquid Handling
UniPette Tetra Pipette Kit
Fully autoclavable at 121°C
■ Lightweight and ergonomic design
■ Clear digital display
■ Integral tip ejector for access into narrow tubes
■ Easy to calibrate and maintain with tool supplied
■ Autoclavable tip-cone
■ Used with 'universal' pipette tips
INSIDE PACKAGE:
01 - Linear stand (up to 6 pipettes)
01 - Pipette 0.1 - 2.5μl
01 - Pipette 2 - 20μl
01 - Pipette 20 - 200μl
01 - Pipette 100 - 1000μl
02 - Racked tip 200μl - Yellow
01 - Racked tip 1000μl - Blue
01 - Racked tip 10μl
01 - Uniscience Timer
UniPette Trio Pipette Kit
Fully autoclavable at 121°C
■ Lightweight and ergonomic design
■ Clear digital display
■ Integral tip ejector for access into narrow tubes
■ Easy to calibrate and maintain with tool supplied
■ Autoclavable tip-cone
■ Used with 'universal' pipette tips
INSIDE PACKAGE:
01 - Linear stand (up to 6 pipettes)
01 - Pipette 0.5 - 10μl
01 - Pipette 10 - 100μl
01 - Pipette 100 - 1000μl
01 - Racked tip 200μl - Yellow
01 - Racked tip 1000μl - Blue
01 - Racked tip 10μl
01 - Uniscience Timer
Uniscience Pipette Controller is a powerful, lightweight and ergonomically designed pipetting controller for all commonly used glass or plastic pipettes. Our Pipette Controller has received over whelming response since its launch in 2008 and has been well accepted for its unique advantages to the end user.
Features:
Powerful yet quite pump can fill 25 ml pipette under 4 seconds Soft grip push buttons Autoclavable pipette cone Double Safety valve and hydrophobic filters provide double protection against fluid penetration Two different speed modes – High, Low along with Gravity drain. The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed Cadmium Free environment friendly NiMH batteries Batteries can be changed very easily by the end user The intelligent charger prevents over charging / heating of batteries Low battery indicator The specially designed desktop stand enables the Pipette Controller to be charged while resting on it The Pipette Controller can hold the serological pipette while resting on the desktop stand
Technical Specifications:
Power 2 x 1.2 V / 1000 mAh rechargeable NiMH batteries.
Battery usage Duration Eight hours continuous use
Battery Charging Duration 2 – 3 hours to charge fully
Volumetric Range Plastic or Glass pipette from 0.1 ml up to 200 ml
Safety System Replaceable hydrophobic 0.45 µm PTFE filter Safety check valve
Standard Accessories Battery Charger
Hydrophobic PTFE membrane Filter 0.45 µm – 1Pc
Hydrophobic PTFE membrane Filter 0.20 µm – 1Pc
Wall mounting stand with screw Desktop stand
Accessories: Power Charger Desktop stand Wall mount bracket Two spare membrane filters: 0.2um and 0.45um Manual and warranty card
Packing: Pipette Controller and Accessories
Lightweight and ergonomic design UniPette micro-pipette
■ Fully autoclavable
■ Clear digital display
■ Staggered tip ejector for easy tip ejection
■ Head rotates 360° for user comfort
■ Easy to calibrate with tool supplied
■ Used with 'universal' pipette tip
Packing:
1 Pipette 0.5-10μl, Single Stand, Calibration Tool and Lubrication Fluid.
Lightweight and ergonomic design UniPette micro-pipette
■ Fully autoclavable
■ Clear digital display
■ Staggered tip ejector for easy tip ejection
■ Head rotates 360° for user comfort
■ Easy to calibrate with tool supplied
■ Used with 'universal' pipette tip
Packing: 1 Pipette 5-50μl, Single Stand, Calibration Tool and Lubrication Fluid.
Lightweight and ergonomic design UniPette micro-pipette
■ Fully autoclavable
■ Clear digital display
■ Staggered tip ejector for easy tip ejection
■ Head rotates 360° for user comfort
■ Easy to calibrate with tool supplied
■ Used with 'universal' pipette tip
Packing: 1 Pipette 50-300μl, Single Stand, Calibration Tool and Lubrication Fluid.
Lightweight and ergonomic design UniPette micro-pipette
■ Fully autoclavable
■ Clear digital display
■ Staggered tip ejector for easy tip ejection
■ Head rotates 360° for user comfort
■ Easy to calibrate with tool supplied
■ Used with 'universal' pipette tip
Packing: 1 Pipette 0.5-10μl, Single Stand, Calibration Tool and Lubrication Fluid.
Lightweight and ergonomic design UniPette micro-pipette
■ Fully autoclavable
■ Clear digital display
■ Staggered tip ejector for easy tip ejection
■ Head rotates 360° for user comfort
■ Easy to calibrate with tool supplied
■ Used with 'universal' pipette tip
Packing: 1 Pipette 5-50μl, Single Stand, Calibration Tool and Lubrication Fluid.
Lightweight and ergonomic design UniPette micro-pipette
■ Fully autoclavable
■ Clear digital display
■ Staggered tip ejector for easy tip ejection
■ Head rotates 360° for user comfort
■ Easy to calibrate with tool supplied
■ Used with 'universal' pipette tip
Packing: 1 Pipette 50-300μl, Single Stand, Calibration Tool and Lubrication Fluid.
Fully autoclavable at 121°C UniPette micro-pipette
■ Lightweight and ergonomic design
■ Clear digital display
■ Integral tip ejector for access into narrow tubes
■ Easy to calibrate and maintain with tool supplied
■ Autoclavable tip-cone
■ Used with 'universal' pipette tips
Packing: 1 Pipette 0.1-2.5μl, Single Stand, Calibration Tool and Lubrication Fluid.
Fully autoclavable at 121°C UniPette micro-pipette
■ Lightweight and ergonomic design
■ Clear digital display
■ Integral tip ejector for access into narrow tubes
■ Easy to calibrate and maintain with tool supplied
■ Autoclavable tip-cone
■ Used with 'universal' pipette tips
Packing: 1 Pipette 0.5-10μl, Single Stand, Calibration Tool and Lubrication Fluid.