Consumables
This transparent polyester-based film has a medium-strength adhesive. It is designed as a low-cost sealing option and useful for temporary storage and as a cover for applications such as centrifugation. And tabs allow for easy application and removal. This seal is removable without residue on the plate. Specification
- Non-pierceable
- Peelable
- Seal integrity range: -20°C to 80°C
- Application: Sample storage (aqueous)
- Sheets: 135mm x 80mm
- Roll: 110m x 80mm
Packing: 100 Sheets
This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high-temperature applications due to its effectiveness in preventing sample evaporation. Specification
- The PCR Foil Seal is piercable; when pierced, the foil tears in an irregular manner which prevents the formation of a vacuum.
- It also has perforated end tabs for easy application and removal by peeling.
Packing: 100 sheets
A strong transparent adhesive seal, recommended for PCR. Suitable for fluorescence applications.
Specification:Non-sterile Non-pierce-able
Peel-able Seal integrity range: -20°C to 110°C
Application: PCR
Sheets: 135mm x 80mm
Packing: 100 sheets
A strong transparent adhesive seal. Recommended for PCR. Suitable for fluorescence applications.
- Non-sterile
- Non-piercable
- Peelable
- Seal integrity range: -20°C to 110°C
- Application: PCR
- Sheets: 125mm x 78mm
Packing: 100 Sheets (125mm x 78mm)
Heat seal to polypropylene and polystyrene plates that can be pierced with a tip or peeled off by hand. Good solvent resistance including DMSO. Resealing onto existing seal is possible. A colour print identifies the non-sealing surface. Specification
■ Pierceable
■ Peelable
■ Non-sterile
■ Seal integrity range: -20°C to 110°C
■ Application: Low temperature compound storage, short term room temperature compound storage, PCR
Packing: 100 Sheets (125mm x 78mm)
This unique seal has optically clear adhesive free windows. These windows can be imaged through and also allow for gas exchange. The clear film is made of a porous material which allows for a uniform air and CO2 exchange, whilst acting as a moisture barrier and preventing evaporation. The seal is coated with a strong adhesive (except for the optical windows) which has a high sealing integrity. This ensures a reliable seal and prevention of well-to-well contamination. The gas permeable seal enables long term incubations without intervention, whilst allowing for imaging through the optically clear windows. This can reduce the risk of sample contamination, evaporation and can improve experimental workflow. Use of this seal within plate readers can prevent moisture release into the sensitive equipment. A number of plate reader manufacturers recommend the use of the 4titude gas permeable moisture barrier seal. SpecificationFeatures:
■ Optically clear for imaging
■ Sterile
■ Peelable
■ Pierceable
■ Seal integrity range: -20°C to 80°C
■ Sheets: 137mm x 80mm
■ Available with 24/96/384 windows for use with 24/96/384 well plates Permeability:
■ O2: 2,900cm3/m2.d.bar
■ CO2: 4,700cm3/m2.d.bar
■ Moisture transmission: >1g/m2.d.bar Applications:
■ Plate readers
■ Eukaryotic cell culture
■ Bacterial cell culture
■ Long-term incubation, live cell assays
■ Confocal microscopy
Packing: 50 sheets (5 packs of 10 sheets)
Heat sealing is the gold standard method for plate sealing. It minimises sample loss and maximises sample security for PCR, qPCR, storage and other applications. Standard size, 78mm width rolls, can be loaded in either of two roll positions depending on roll length and available space enabling the entire instrument to fit under the gantree of many liquid handling robots. The roll width covers an SBS footprint microplate and the seal is cut at the end of the plate leaving only minimal overhangs to allow for easy removal of the seal, but not interfering with plate stacking. Specification
■ High degree of reliability for automated sealers
■ No adhesion of dry sample to the film
■ Reduced risk of contamination
■ Substantial savings compared to adhesive seals
■ Minimises sample loss: cost savings and reduction in reaction failures
Packing: 1 Roll (500m x 78mm)
This optically clear seal was specifically developed for optical applications, particularly qPCR. It is non-tacky to skin and gloves enabling ease of handling and application and positioning. This seal is a pressure-activated seal. The polyester film has adhesively held within capsules on the underside, and pressure must be applied to the top-side, around the raised-well rims to activate the adhesive.
- Non-sterile
- Non-pierceable
- Peelable
- Seal integrity range: -80°C to 100°C
- Sheets: 140 x 77mm
- Roll: 100m x 80mm
- Applications: qPCR (96 or 384 well)
Packing: 100 Sheets
- Free of RNase, DNase, protease and endotoxin.
- Made with highest grade polypropylene with resistance to corrosion from chemicals such as DMSO, phenol, and chloroform.
- Non-Sterile as standard - sterilisation available upon request
- Suitable as a collection plate from filter systems
- Temperature range for use -80°C to 120°C
- Alphanumeric labelling
- Stackable
- Autoclavable
Packing: 100pcs of silicone Cap Mat
- Pierceable silicon rubber sealing mat
- Suitable for heat sealing Specification:
Material: Silicone
Dimensions: Total length of 4.67” total width of 2.90”
Packing: 5pcs of silicone Cap Mat
■ Pierceable, suitable for heat sealing
■ Compatible with deep well plate formats
■ Silicone Dimensions: Length of 4.67” and Width of 2.90”
Description: Pierceable silicone square well sealing mat suitable for heat sealing
Packing: 5pcs of silicone Cap Mat