CENTRIFUGES

Biocen 22 - Micro Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00
No reviews

Very often the microcentrifuge user must consider the interactions between the tube and the sample, but ... What about the interaction between the tube and the centrifuge?

The Biocen 22 is designed to prevent contamination by interaction with the centrifuge and temperature increasing by:
Chamber stainless steel centrifuge easily sterilized.
Rotors with tight lids.
Ventilation system that helps reduce the temperature.

Designed for small volume, allows 24 microtubes of 2.2 ml, 32 of 0.2 ml, and up to 24 tubes of 1.5 x 75 mm for microhematocrit, reaching 15.000 RPM / 21.885 xg.

Reduce spin time by controlling the different stages, allowing braking according to the type of sample.

Optimizing the samples separation on a safe environment.

User Friendliness

  • LED screen shown RPM/RCF (on steps 100 RPM/10xg) and time.
  • Intuitive handling through start, stops, short spin and lid keys.
  • Rotor list on memory.
  • Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
  • Short spin key with speed adjustable.
  • Acceleration and braking selectable by operator
  • Automatic open lid.
  • Last values remain on memory.
  • Lid latch lock.
  • Microprocessor controlled.
  • Option: free or locked adjustment of RPM/RCF along the run.

Features

  • Induction motor maintenance free.
  • Max. capacity: 24 x 2.2 ml.
  • Speed, up to 21.885 xg/15.000 RPM
  • Quiet: noise level < 60 dB.

Safety

  • Lid locking and holding.
  • Imbalance switch off.
  • Manual overriding.
  • Chamber of centrifugation in stainless steel.
  • Lid dropping protection.
  • Viewing and calibration port in the lid.
  • Several messages keep the operator informed about the device situation.
  • Guard ring between the chamber of centrifugation and the housing.
  • Forced ventilation which reduces the temperature increase.

Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Versions:

Code Dimensions (mm)(w x d x h) Net weight (Kg) Voltage (V) Frecuency (Hz) Consumption (W)
CE 146 276 390 272 17 220-240 50-60 180
CE 147 276 390 272 17 110-120 50-60 180


Microcen 24 - Micro Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

The new Microcen 24 bursts as the solution for all those laboratories which are looking for high performance and versatility in a small centrifuge. Allows work with up to 8 conical tubes of 15 ml. as well as other configurations, as its available rotors can be exchanged easily. This equipment includes a rotor with capacity for 8 tubes of 15 ml. round bottom and has an optional range of rotors and adapters.

Features

LED screen:

  • Shows RPM/ RCF and time.
  • Speed programming in 50 RPM/ 10 xg steps.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 to 99 min. programmable in 1 min. steps and hold position.
  • Acceleration and deceleration control in 3 steps: fast, soft and free.
  • Acoustic and visual messages on screen warning the user the equipment Status

Easy to use

  • Microprocessor controlled.
  • Induction motor maintenance free (brushless).
  • Rotors list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Over-speed protection.

Safety

  • Lid provided with security systems:

- Automatic lid lock system, motorized. Emergency lid-lock release.

- Locking and protection against opening along the run.

- Lid dropping protection.

- Port in the lid for calibration and operation checking.

  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing
  • Automatic disconnection for energy saving, with deactivation option.

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.

Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Max. capacity: 10 x 15 ml.       Max. speed: 6.368 xg / 8.000 RPM

Versions

This code includes the next configuration:

Centrifuge Microcen 24 + angle fixed rotor RT 246 with capacity for 8x15 ml.

In the next chart you can find a range of accessories (rotors and adapters) that will increase the versatility of this configuration.

Accessories

Download Datasheet

Digicen 21 - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

The centrifuge Digicen 21 highlights its versatility among the universal centrifuges and it’s provided of:

Swing out rotors for max 4 x 100 ml for tubes, microplates as well as microtubes.
Angle fixed low speed up to 24 tubes of 15ml.
Angle fixed high speed for microtubes up to 50 ml conical.
It´s controlled through an LCD screen showing centrifugation values like time, RPM/RCF, as well as braking time, graphic for the open lid, progress bar, messages, and acoustic signals for error or end of the program, which provides the user the process monitoring.

Thinking on centrifugation.

User Friendliness
- LCD screen shown RPM/RCF (on steps 100 RPM/10xg),time, temperature (1°C steps) and acceleration/deceleration (1 second steps).
- Intuitive handling through the start, stop short spin, and lid keys.
- Rotor list on memory.
- Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
- Short spin key with speed adjustable.
- Automatic rotor recognition.
- Progressive acceleration and braking are selectable by operator up to 175 ramps.
- 16 memories.
- Automatic open lid (non-refrigerated)
- Lid latch lock.
- Microprocessor controlled.
- Option: free or locked adjustment of RPM/RCF along the run.

Feature
- Induction motor maintenance-free
- Max. capacity. 4 x 100 ml.
- Speed, up to 24.959 xg/16.500 RPM
- Quiet: noise level < 60 dB.

Safety
- Lid locking and holding.
- Imbalance switch off.
- Manual overriding.
- Chamber of centrifugation in stainless steel.
- Viewing and calibration port in the lid.
- Several messages keep the operator informed about the device situation.
- Guard ring between the chamber of centrifugation and the housing.
- Lid dropping protection.
- Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.

Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Versions

 

Code Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frequency
(Hz)
Consumption
(W)
CE 110 410 530 320 36 220-240 50-60 280
CE 116 410 530 320 36 110-120 50-60 280

 

Accessories

Download Datasheet

Unicen 21 - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

Universal, compact, versatile and quiet, are concepts which define the Unicen 21. Essential on demanding labs which need a reliable result on a short time, without scarifying the number of samples.

Max capacity 4 tubes of 100 ml, reach up to 4.200 RPM/ 2.899 xg, with 9 interchangeable rotors and up to 40 set of different adapters, covering the basical requirement on separation of clinics, industries, research centers, …

Speed and time are shown on digital displays easily readable, and lid can be open automatically at the end of the run, allowing to the operator a higher autonomy on routine process.

It’s provided of safety systems essentials for a safety processing, with brushless engine maintenance free, unbalance switch off, chamber in stainless steel, lid lock motorized…

Ideal for run a reduced number of samples, it’s undoubtedly the most appropriated choice for emergency labs, due to its reduce the time on sample preparation.

Simplifying separation.

User Friendliness

  • LED screen shown RPM/RCF (on steps 100 RPM/10xg) and time.
  • Intuitive handling through start, stops, short spin and play keys.
  • Rotor list on memory.
  • Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
  • Short spin key with speed adjustable.
  • Acceleration and braking selectable by operator
  • Automatic open lid.
  • Last values remain on memory.
  • Lid latch lock.
  • Microprocessor controlled.
  • Option: free or locked adjustment of RPM/RCF along the run.

Features

  • Induction motor maintenance free.
  • Max. capacity 4 x 100 ml.
  • Speed, up to 4.200 RPM / 2.899 xg.
  • Quiet: noise level < 60 dB.

Safety

  • Lid locking and holding.
  • Imbalance switch off.
  • Manual overriding.
  • Chamber of centrifugation in stainless steel.
  • Viewing and calibration port in the lid.
  • Several messages keep the operator informed about the device situation.
  • Guard ring between the chamber of centrifugation and the housing.
  • Forced ventilation which reduces the temperature increase.
  • Lid dropping protection.

Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.

Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Versions

Code

Dimensions (mm)(w x d x h)

Net weight (Kg)

Voltage (V)

Frecuency (Hz)

Consumption (W)

CE 126

410

530

320

36

220-240

50-60

200

CE 127

410

530

320

36

110-120

50-60

200

 

Accessories

Download Datasheet

Biocen 22R - Micro centrifuge with Cooling System
Translation missing: en.products.product.regular_price $4,450.00
Translation missing: en.products.product.regular_price $4,450.00

The Biocen 22 R can reach up to 30.034 xg , becoming the necessary tool for most demanding labs. Allows 24 microtubes of 2.2 ml, 32 of 0.2 ml and 8x15 ml, conical.

Usually microcentrifuges work with samples sensitive, valuables, or dangerous ( toxic, radioactive, infectious). Ortoalresa has built the Biocen 22 R with several advantages which allow a safe analysis, without interaction of centrifuge, as:

  • Cooling system which maintains the sample temperature at 4°C at max speed, 
    regardless of the rotor.
  • Chamber of centrifugation in stainless steel, allowing an easy disinfection on samples 
    leakages, avoiding contamination form the centrifuge.
  • Rotors with hermetic lids.
  • Accessories sterilizables.

User Friendliness

  • LCD screen shown RPM/RCF (on steps 100 RPM/10xg),time, temperature (1°C steps) and braking (1 second steps).
  • Intuitive handling through start, stop, short spin and lid keys.
  • Rotor list on memory.
  • Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
  • Short spin key with speed adjustable.
  • Automatic rotor recognition.
  • Acceleration and braking selectable by operator.
  • 15 memories and pre-cooling program.
  • Automatic open lid.
  • Lid latch lock.
  • Microprocessor controlled.
  • Option: free or locked adjustment of RPM/RCF along the run.

Features

  • Induction motor maintenance free
  • Max. capacity 8 x 15 ml.
  • Speed, up to 30.034 xg/18.100 RPM.
  • Quiet: noise level < 60 dB.

Safety

  • Lid locking and holding.
  • Imbalance switch off.
  • Manual overriding.
  • Chamber of centrifugation in stainless steel.
  • Viewing and calibration port in the lid.
  • Several messages keep the operator informed about the device situation.
  • Guard ring between the chamber of centrifugation and the housing.
  • Lid dropping protection.

Cooling

  • Precooling program with rotor spinning and temperature selectable by operator.
  • 4°C at Max speed as higher.
  • Temperature range from -20°C (-4°F) to 40°C (104°F).
  • Temperature sensor inside the chamber, gas R 404A HFC.

Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Regulation: 1005/2009 & 842/2006.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Versions

Code
Dimensions (mm)(w x d x h)
Net weight (Kg)
Voltage (V)
Frecuency (Hz)
Consumption (W)
CE 148
276
640
272
34
220-240
50-60
540
CE 149
276
640
272
34
110-120
50-60
540
Accessories
Digicen 21R - Centrifuge with Cooling System
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

The centrifuge refrigerated Digicen 21R can reach up to 24.959 xg with a wide range of rotors:

- Swing out rotors, with a max volume of 4 x 100 ml which can fit several sets of adapters for tubes with or without caps, microtubes, microplates.
- Angle fixed low speed for routine purposes.
- Angle fixed high speed from microtubes to 50 ml conical tubes.

The LCD screen showing the selectable values like time, RPM, RCF, temperature, and braking time as well as graphics for lid open, progress bar, and acoustic signals for better control of the process by the operator.

The Powerful refrigeration system, enhanced by the pre-cooling program, keep the samples at stable and controlled temperature, avoiding sample temperature fluctuations at introducing into the device.

Stabilizing sample preparation.

User Friendliness
- LCD screen shown RPM/RCF (on steps 100 RPM/10xg),time, temperature (1°C steps) and acceleration/deceleration (1 second steps).
- Intuitive handling through the start, stop the short spin and lid keys.
- Rotor list on memory.
- Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
- Short spin key with speed adjustable.
- Automatic rotor recognition.
- Acceleration and braking are selectable by the operator.
- 15 memories and pre-cooling program.
- Lid latch lock.
- Microprocessor controlled.
- Option: free or locked adjustment of RPM/RCF along the run.

Features
- Induction motor maintenance-free
- Max. capacity 4 x 100 ml.
- Speed, up to 24.959 xg/16.500 RPM.
- Quiet: noise level < 60 dB.

Safety
- Lid locking and holding.
- Imbalance switch off.
- Manual overriding.
- Chamber of centrifugation in stainless steel.
- Viewing and calibration port in the lid.
- Several messages keep the operator informed about the device situation.
- Guard ring between the chamber of centrifugation and the housing.
- Lid dropping protection.

Cooling
- Precooling program with rotor spinning and temperature selectable by the operator.
- 4°C at Max speed as higher.
- Temperature range -20°C (-4 °F) to 40°C (104 °F)
- Temperature sensor inside the chamber, gas R 404A HFC.
- Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Regulation: 1005/2009 & 842/2006.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Versions

Code Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
Z max Advisable(Hz)
CE 113 590 680 320 67 220-240 50-60 700 <|0.446|
CE 119 590 680 320 67 110-120 50-60 700 <|0.446|

 

Accessories

Download Datasheet

Digtor 22 - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

Digtor 22

Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM

Benchtop centrifuge with large capacity and high perShapence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angle fixed and swing out. It has more than 50 different sets of adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high speed equipment, resulting in a routine use centrifuge with some specifications characteristic of superior level models. Its colour TFT touch screen offers perShapence that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.

The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and the assurance that no parameter is uncontrolled.

Features

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:
    – Automatic lid lock system, motorized with double lock.
    – Emergency lid-lock release.
    – Locking and protection against opening along the run.
    – Lid dropping protection.
    – Port in the lid for calibration and operation checking.
  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

Standards

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Versions

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
CE 187 540 650 390 50 220-230 50-60 1020
CE 188 540 650 390 50 110-120 50-60 1020

 

Download Datasheet

Comparable Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 201 (1)(2)(4)(5)
RT 201 (1)(2)(4)(5)

Rotor: Swing out
Max. capacity: 4 blood bags
RPM Max.: 3.700
Radius (mm): 204
RCF Max. (xg): 3.122
*Only available for refrigerated models.

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 245 (2)(3)
RT 245 (2)(3)

Rotor: Swing out
Max. capacity: 10/6/2/2 microtiter
RPM Max.: 4.500
Radius (mm): 166
RCF Max. (xg): 3.758
*Only available for refrigerated models.

RT 250
RT 250

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.000
Radius (mm): 206
RCF Max. (xg): 3.756

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

Digtor 22R - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

Digtor 22R

Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM

Benchtop centrifuge with large capacity and high perShapence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angle fixed and swing out. It has more than 50 different sets of adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high speed equipment, resulting in a routine use centrifuge with some specifications characteristic of superior level models. Its colour TFT touch screen offers perShapence that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.

The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and the assurance that no parameter is uncontrolled.

Features

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:
    – Automatic lid lock system, motorized with double lock.
    – Emergency lid-lock release.
    – Locking and protection against opening along the run.
    – Lid dropping protection.
    – Port in the lid for calibration and operation checking.
  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

Cooling

  • Remains the refrigeration after centrifugation process.   
  • Precooling program with rotor spinning and temperature selectable.
  • Guarantee 4 °C at maximum RPM.
  • Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
  • Temperature sensor inside the chamber.
  • Gas R 449A HFO (CFC free).

Standards and Directives

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Versions

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
Z max Advisable(Hz)
CE 189 720 805 390 95 220-230 50-60 1050 <|0,446|
CE 190 720 805 390 95 110-120 50-60 1050 <|0,446|
 

Download Datasheet

Comparable Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 201 (1)(2)(4)(5)
RT 201 (1)(2)(4)(5)

Rotor: Swing out
Max. capacity: 4 blood bags
RPM Max.: 3.700
Radius (mm): 204
RCF Max. (xg): 3.122
*Only available for refrigerated models.

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 245 (2)(3)
RT 245 (2)(3)

Rotor: Swing out
Max. capacity: 10/6/2/2 microtiter
RPM Max.: 4.500
Radius (mm): 166
RCF Max. (xg): 3.758
*Only available for refrigerated models.

RT 250
RT 250

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.000
Radius (mm): 206
RCF Max. (xg): 3.756

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

Dilitcen 22 - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

Dilitcen 22

Max. capacity: 4 x 1.000 ml.
Max. speed: 21.948 xg / 14.300 RPM

The largest of our benchtop machines, with a capacity of up to 4 litres and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples so as to balance the load and for easy identification. It has a wide range of accessories with capacity for four 1.000 ml. bottles, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.

Its colour TFT touch screen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled and maintaining the process at all times.

Features

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:

         – Automatic lid lock system, motorized with double lock.
         – Emergency lid-lock release.
         – Locking and protection against opening along the run.
         – Lid dropping protection.
         – Port in the lid for calibration and operation checking.

  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

Standards

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Standards

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
CE 206 540 650 390 50 220-230 50-60 1020
CE 207 540 650 390 50 110-120 50-60 1020

 

Compatible Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

RT 265 (4)
RT 265 (4)

Rotor: Swing out
Max. capacity: 4 x 1.000 ml.
RPM Max: 4.000
Radio (mm): 205
RCF Max. (xg): 3.667

Download Datasheet

 

Magnus 22 - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

Magnus 22

Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM

Regarding floor standing equipment, Magnus 22 offers the maximum perShapence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of useful space. Its ergonomic design allows easy access to the rotor as well as traceability of the positioning to balance the load and ease of identification. Its colour TFT touch screen offers perShapence that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled.

It has a wide range of accessories for 750 ml. tubes, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical applications.

Features

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:
    – Automatic lid lock system, motorized with double lock.
    – Emergency lid-lock release.
    – Locking and protection against opening along the run.
    – Lid dropping protection.
    – Port in the lid for calibration and operation checking.
  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

Standards and Directivies

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Versions

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
CE 191 540 650 930 113 220-230 50-60 1020
CE 192 540 650 930 113 110-120 50-60 1020

Compatible Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 201 (1)(2)(4)(5)
RT 201 (1)(2)(4)(5)

Rotor: Swing out
Max. capacity: 4 blood bags
RPM Max.: 3.700
Radius (mm): 204
RCF Max. (xg): 3.122
*Only available for refrigerated models.

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 245 (2)(3)
RT 245 (2)(3)

Rotor: Swing out
Max. capacity: 10/6/2/2 microtiter
RPM Max.: 4.500
Radius (mm): 166
RCF Max. (xg): 3.758
*Only available for refrigerated models.

RT 250
RT 250

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.000
Radius (mm): 206
RCF Max. (xg): 3.756

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

Download Datasheet

 

Magnus 22R - Centrifuge
Translation missing: en.products.product.regular_price $9,999.00
Translation missing: en.products.product.regular_price $9,999.00

Magnus 22

Max. capacity: 4 x 750 ml.

Max. speed: 21.948 xg / 14.300 RPM

The refrigerated version of our floor standing equipment offers the maximum perShapence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of useful space. Its ergonomic design allows easy access to the rotor as well as traceability of the positioning to balance the load and easy identification.

With a wide range of accessories that offers capacities for tubes of 750 ml., micro-plates, micro-tubes and a great number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml. for clinical applications. It also has a specific rotor for blood bags and tubes extraction. Its powerful refrigeration system enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected. This characteristic gives the user confidence in traceability during the centrifugation cycle.

Features

TFT color touch screen, visible from more than 3 m.

  • Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:
    – Automatic lid lock system, motorized with double lock.
    – Emergency lid-lock release.
    – Locking and protection against opening along the run.
    – Lid dropping protection.
    – Port in the lid for calibration and operation checking.
  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Automatic disconnection for energy saving up to 8 h.

Cooling

  • Remains the refrigeration after centrifugation process.   
  • Precooling program with rotor spinning and temperature selectable.
  • Guarantee 4 °C at maximum RPM.
  • Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
  • Temperature sensor inside the chamber.
  • Gas R 449A HFO (CFC free).

Standards and Directivies

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Versions

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
Z max Advisable(Hz)
CE 193 540 650 930 145 220-230 50-60 1050 <| 0.446 |
CE 194 540 650 930 145 110-120 50-60 1050 <| 0.446 |

Compatible Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 201 (1)(2)(4)(5)
RT 201 (1)(2)(4)(5)

Rotor: Swing out
Max. capacity: 4 blood bags
RPM Max.: 3.700
Radius (mm): 204
RCF Max. (xg): 3.122
*Only available for refrigerated models.

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 245 (2)(3)
RT 245 (2)(3)

Rotor: Swing out
Max. capacity: 10/6/2/2 microtiter
RPM Max.: 4.500
Radius (mm): 166
RCF Max. (xg): 3.758
*Only available for refrigerated models.

RT 250
RT 250

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.000
Radius (mm): 206
RCF Max. (xg): 3.756

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

Download Datasheet

 

Login