Dilitcen 22 - Centrifuge

Dilitcen 22 - Centrifuge
Regular price $9,999.00 (Dilitcen22)

Dilitcen 22

Max. capacity: 4 x 1.000 ml.
Max. speed: 21.948 xg / 14.300 RPM

The largest of our benchtop machines, with a capacity of up to 4 litres and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples so as to balance the load and for easy identification. It has a wide range of accessories with capacity for four 1.000 ml. bottles, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.

Its colour TFT touch screen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled and maintaining the process at all times.

Features

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:

         – Automatic lid lock system, motorized with double lock.
         – Emergency lid-lock release.
         – Locking and protection against opening along the run.
         – Lid dropping protection.
         – Port in the lid for calibration and operation checking.

  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

Standards

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Standards

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
CE 206 540 650 390 50 220-230 50-60 1020
CE 207 540 650 390 50 110-120 50-60 1020

 

Compatible Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

RT 265 (4)
RT 265 (4)

Rotor: Swing out
Max. capacity: 4 x 1.000 ml.
RPM Max: 4.000
Radio (mm): 205
RCF Max. (xg): 3.667

Download Datasheet

 


Dilitcen 22

Max. capacity: 4 x 1.000 ml.
Max. speed: 21.948 xg / 14.300 RPM

The largest of our benchtop machines, with a capacity of up to 4 litres and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples so as to balance the load and for easy identification. It has a wide range of accessories with capacity for four 1.000 ml. bottles, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.

Its colour TFT touch screen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled and maintaining the process at all times.

Features

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.

User Friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:

         – Automatic lid lock system, motorized with double lock.
         – Emergency lid-lock release.
         – Locking and protection against opening along the run.
         – Lid dropping protection.
         – Port in the lid for calibration and operation checking.

  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

Standards

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Standards

Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
CE 206 540 650 390 50 220-230 50-60 1020
CE 207 540 650 390 50 110-120 50-60 1020

 

Compatible Rotors

RT 191 (1)(4)
RT 191 (1)(4)

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3.700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 192
RT 192

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4.200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 195
RT 195

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3.800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 197
RT 197

Rotor: Angle fixed 45º
Max. capacity: 8 x 50 ml.
RPM Max.: 6.000
Radius (mm): 149
RCF Max. (xg): 5.997

RT 198
RT 198

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5.600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 199
RT 199

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4.700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 202 (4)
RT 202 (4)

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3.700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 206
RT 206

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14.300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 238
RT 238

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9.000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 264
RT 264

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2.500
Radius (mm): 212
RCF Max. (xg): 1.481

RT 265 (4)
RT 265 (4)

Rotor: Swing out
Max. capacity: 4 x 1.000 ml.
RPM Max: 4.000
Radio (mm): 205
RCF Max. (xg): 3.667

Download Datasheet

 

Warranty Information

All products we sell are covered solely by the manufacturer's warranty. Warranty information is included with the product and is subject to the conditions set forth by the manufacturer. We include such information in the product details for each item, when ever available. The manufacturer warrants their products are free from defects in material and workmanship. Repair or replacement may be issued for any product which is found to be defective under the terms of this warranty. Wholesale Point will assist with warranty issued within the first 14 days of product purchase. After that time the product manufacturer must be contacted directly to address all warranty issues. In many cases, the manufacturer can diagnose and resolve product concerns over the phone. For more information or to obtain contact information for the manufacturer, please call us +1(786) 420-2018.

Purchasing & Delivery

We take pride in making sure your order gets out quickly. We carefully check every item before shipping and we give extra care to our packaging to make sure every item arrives safely. Orders normally ship via UPS Ground, FedEx, or USPS within 1-2 days when in stock. Some items are drop shipped from the manufacturer and can take a little longer. For your convenience, whenever we ship an order, we electronically mail a shipping confirmation notice including the tracking number from UPS, FedEx, USPS, or a local delivery service.

Drop Ship Orders

Orders that are drop shipped from the manufacturer are subject to the manufacturer's availability and shipping schedule. Some items are special order or built-to-order and can take an average of 5-7 business days to ship. We make reasonable attempts to provide and display a shipping lead time on each product we sell. If you have any questions about our shipping policy or would like to know the availability or lead time on a specific drop ship product please feel free to contact us via our Contact Us Page. If you would like a drop shipped item expedited, please place your order by phone to guarantee your order can be expedited.

Payment Policy

We accept Visa, MasterCard, PayPal, American Express, and Discover.

Please note: When the checkout/customer details section asks for your "personal information", please enter your full name and billing address. The name and address you enter must match the information you have on file with your credit card provider, or the order will not be authorized.  If your credit card gets declined for any reason, a charge may show pending on your account.  This charge will fall off usually within 24-48 hours depending on your bank.

Login