Equipment
Interchangeable blocks provide to configure a system to exactly meet your research needs. Range of configurations hold 1, 2 or 4 interchangeable modular blocks which can hold a variety of tube sizes. Available for tubes from 1.5ml.
Interchangeable blocks provide to configure a system to exactly meet your research needs. The range of configurations holds 1, 2, or 4 interchangeable modular blocks which can hold a variety of tube sizes.
Available for tubes from 15ml
Interchangeable blocks provide to configure a system to exactly meet your research needs. The range of configurations holds 1, 2, or 4 interchangeable modular blocks which can hold a variety of tube sizes.
Available for tubes from 2ml
Interchangeable blocks provide to configure a system to exactly meet your research needs. The range of configurations holds 1, 2, or 4 interchangeable modular blocks which can hold a variety of tube sizes.
Available for 96 tubes de 0,2ml, strips or plates
Magnus 22
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
Regarding floor standing equipment, Magnus 22 offers the maximum perShapence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of useful space. Its ergonomic design allows easy access to the rotor as well as traceability of the positioning to balance the load and ease of identification. Its colour TFT touch screen offers perShapence that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled.
It has a wide range of accessories for 750 ml. tubes, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical applications.
Features
TFT color touch screen, visible from more than 3 m.:
- Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing.
- Automatic disconnection for energy saving up to 8 h., with deactivation option.
Standards and Directivies
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Versions
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
|||
| CE 191 | 540 | 650 | 930 | 113 | 220-230 | 50-60 | 1020 |
| CE 192 | 540 | 650 | 930 | 113 | 110-120 | 50-60 | 1020 |
Compatible Rotors
Magnus 22
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
The refrigerated version of our floor standing equipment offers the maximum perShapence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of useful space. Its ergonomic design allows easy access to the rotor as well as traceability of the positioning to balance the load and easy identification.
With a wide range of accessories that offers capacities for tubes of 750 ml., micro-plates, micro-tubes and a great number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml. for clinical applications. It also has a specific rotor for blood bags and tubes extraction. Its powerful refrigeration system enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected. This characteristic gives the user confidence in traceability during the centrifugation cycle.
Features
TFT color touch screen, visible from more than 3 m.
- Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Automatic disconnection for energy saving up to 8 h.
Cooling
- Remains the refrigeration after centrifugation process.
- Precooling program with rotor spinning and temperature selectable.
- Guarantee 4 °C at maximum RPM.
- Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
- Temperature sensor inside the chamber.
- Gas R 449A HFO (CFC free).
Standards and Directivies
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Versions
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
Z max Advisable(Hz) | |||
| CE 193 | 540 | 650 | 930 | 145 | 220-230 | 50-60 | 1050 | <| 0.446 | |
| CE 194 | 540 | 650 | 930 | 145 | 110-120 | 50-60 | 1050 | <| 0.446 | |
The new Microcen 24 bursts as the solution for all those laboratories which are looking for high performance and versatility in a small centrifuge. Allows work with up to 8 conical tubes of 15 ml. as well as other configurations, as its available rotors can be exchanged easily. This equipment includes a rotor with capacity for 8 tubes of 15 ml. round bottom and has an optional range of rotors and adapters.
Features
LED screen:
- Shows RPM/ RCF and time.
- Speed programming in 50 RPM/ 10 xg steps.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 to 99 min. programmable in 1 min. steps and hold position.
- Acceleration and deceleration control in 3 steps: fast, soft and free.
- Acoustic and visual messages on screen warning the user the equipment Status
Easy to use
- Microprocessor controlled.
- Induction motor maintenance free (brushless).
- Rotors list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Over-speed protection.
Safety
- Lid provided with security systems:
- Automatic lid lock system, motorized. Emergency lid-lock release.
- Locking and protection against opening along the run.
- Lid dropping protection.
- Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing
- Automatic disconnection for energy saving, with deactivation option.
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Max. capacity: 10 x 15 ml. Max. speed: 6.368 xg / 8.000 RPM
Versions
This code includes the next configuration:
Centrifuge Microcen 24 + angle fixed rotor RT 246 with capacity for 8x15 ml.
In the next chart you can find a range of accessories (rotors and adapters) that will increase the versatility of this configuration.
Accessories
Featuring in small size and versatility, the newly designed Uniscience Power Supply is an ideal choice for any researcher. Capable of providing constant voltage or current in 1V or 1mA increment, the unit is perfectly suitable to run both vertical polyacrylamide or horizontal agarose gel electrophoresis experiments. The continuous or timed operation can be easily set up using a simple and user-friendly interface. The UNI-E141 power supply features 2 electrode pairs, allowing for 2 gels to be run simultaneously, saving both time and valuable bench space. With a universal voltage rating, the UNI-E141 power supply is also designed and constructed to the most rigorous safety standards.
Features
- Constant voltage or constant current operation
- 1V increment voltage control; 1mA increment current control
- Max 300V, 400mA, and 60W for Mini Pro 300V
- Two pairs of outlet terminals
- Timer with alarm function
- Safety device
- Compact size and lightweight
- Competitive pricing choice
- Packages with midi sized horizontal electrophoresis systems and vertical electrophoresis systems
Specifications
- Output voltage / Inc.: 10 - 300V / 1V
- Output current / Inc.: 10 - 400mA / 1mA
- Output power: 60W
- Output type: Constant voltage or constant current
- Control: Microprocessor controller
- Terminal pairs: 2 Pairs
- Timer: 999 (min) with alarm / Continuous
- Safety device: No-load detection; shrouded plugs and sockets
- Operation temperature: 4oC to 40oC
- Dimension (WxLxH): 5.51"x7.52"x3.31" (140x191x84mm)
- Material: Polycarbonate housing and aluminum base plates
- Weight: Approx. 2.2lb (1kg)
- Rated voltage: Universal, 100 - 240V
- Application: Sufficient for midi sized horizontal and vertical electrophoresis systems
- Program: 2-step (V, mA, )
Features
- Constant voltage or constant current operation
- 1V increment voltage control; 1mA increment current control
- Max 300V, 400mA, and 60W for Mini Pro 300V
- Two pairs of outlet terminals
- Timer with alarm function
- Safety device
- Compact size and lightweight
- Competitive pricing choice
- Packages with midi sized horizontal electrophoresis systems and vertical electrophoresis systems
Specifications
- Output voltage / Inc.: 10 - 300V / 1V
- Output current / Inc.: 10 - 400mA / 1mA
- Output power: 60W
- Output type: Constant voltage or constant current
- Control: Microprocessor controller
- Terminal pairs: 2 Pairs
- Timer: 999 (min) with alarm / Continuous
- Safety device: No-load detection; shrouded plugs and sockets
- Operation temperature: 4oC to 40oC
- Dimension (WxLxH): 5.51"x7.52"x3.31" (140x191x84mm)
- Material: Polycarbonate housing and aluminum base plates
- Weight: Approx. 2.2lb (1kg)
- Rated voltage: Universal, 100 - 240V
- Application: Sufficient for midi sized horizontal and vertical electrophoresis systems
- Program: 2-step (V, mA, )
Especially designed for low throughput laboratory workflows, Minilys homogenizes three samples simultaneously in 0.5ml or 2 ml tubes and one sample in 7 ml tubes.
Minilys is a compact and flexible tissue homogenizer to meet particular sample preparation needs for all laboratories working with biological samples.
Especially designed to offer optimal grinding, lysing and homogenizing efficiency, Minilys is capable of handling 3 x 2mL/0.5mL tubes or 1 x 7mL tube to process any type of samples. Its manual but not screw-in locking system makes Minilys an easy-pick-up laboratory instrument.
Affordable, Minilys offers the best personal homogenization solution.
Minilys is ideal for daily lab workflow. Associated with the appropriate lysing kit, Minilys can even grind difficult samples like grains or hairs.
Watch Video - Small and compact, Minilys requires minimal bench space in your laboratory.
Especially designed for low-throughput laboratory workflows and personal use, Minilys homogenizes three samples simultaneously in 0.5ml/2 ml tubes or 1 sample in 7 ml.
Specifications
Capacity:
- from 1 to 3 x 2mL, 0.5mL or 1.5mL tubes
- 1 x 7mL tube
Speed range:
- 3000, 4000 & 5000 rpm
Locking system:
- Manual (no screw-in system)
Cycles time:
- from 5s to 240s
Weight:
- 17lb / 7 kg
Dimensions:
- Length 180mm x Width 290mm x Height 380mm
Power requirement:
- 100 – 230 VAC / 50-60 Hz / Power 1 kVA
Noise:
- less than 70 dB
Norms:
- CE and FCC part 15 certified
Catalogue number:
- EQ06404-200-RD000.0
Benefit
Flexibility:
- Minilys offers the possibility to process either 3 x 0.5, 1.5 or 2mL tubes at once or 1 x 7mL tube.
Easy handling:
- With only two parameters to choose from (speed and time) the Minilys is operational immediately. The non screw-in system to block the tubes makes the Minilys easy-to-use.
Efficiency:
- Minilys is the only small homogenizer based on 3D motion that reaches 5 000rpm. This speed allows users to grind even hard samples like skin or hair.
Technology
The Minilys is the only personal homogenizer based on a 8-figure 3D-motion (multi-directional) movement of the tubes. The same high level of energy given to the beads inside each tube ensures equal homogenization efficiency for all processed samples. Thanks to this complex movement, the Minilys can disrupt any type of sample (even the hardest) in seconds with perfect reproducibility while limiting heat generation. The system used to secure the tubes is manual and very easy to use compared to a screw-in system that can be awkward.
Application
Abstracts of some application notes related to Minilys.
To access all application notes and full versions, visit the Application Center.
- Protein extraction from mouse soft tissues, Immunotherapix, Paris, France, Pharmaceutical sciences (code: 03712-810-DU048)
- RNA extraction from Arabidopsis with Minilys, Institute of Plant Molecular Biology – CNRS, Univ. of Strasbourg, France, Agronomy (code: 03712-810-DU049)
- Mycoviral double-stranded RNA extraction from plant leaf with Minilys, Tokyo University of Agricultural and Technology, Institute of Agriculture, division of Bio-regulation and Bio-interaction, Japan, Agronomy (code: 03712-810-DU051)
- Drug extraction from whole iris-ciliary body pork, PharmOptima, Portage MI, USA, Pharmaceutical sciences (code: 03712-810-DU056)
- RNA Extraction from Mouse Tissues using the Minilys, Cystic Fibrosis and Pulmonary Research Center, University of North Carolina at Chapel Hill, North Carolina, USA, Biomedical & Health sciences (code: 03712-810-DU078)
Register for the Application Center and access more than 1000 scientific references.
Accessories
Microtube adapter set: This option for Minilys allows users to process up to 3 microtubes of 1.5mL at once. 7mL rack Specific rack to handle 12 x 7mL tubes at once Centrifuge adaptor for 7mL tubes Specific adaptor to put 7mL tubes in a centrifuge instead of 15mL Falcon tubes
Uniscience Pipette Controller is a powerful, lightweight, and ergonomically designed pipetting controller for all commonly used glass or plastic pipettes. Our Pipette Controller has received an overwhelming response since its launch in 2008 and has been well accepted for its unique advantages to the end-user.
Features:
The powerful yet quiet pump can fill 25 ml pipette under 4 seconds Soft grip push buttons Autoclavable pipette cone Double Safety valve and hydrophobic filters provide double protection against fluid penetration Two different speed modes – High, Low along with Gravity drain. The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed Cadmium Free environment-friendly NiMH batteries Batteries can be changed very easily by the end-user The intelligent charger prevents overcharging / heating of batteries Low battery indicator The specially designed desktop stand enables the Pipette Controller to be charged while resting on it The Pipette Controller can hold the serological pipette while resting on the desktop stand
Technical Specifications:
- Power 2 x 1.2 V / 1000 mAh rechargeable NiMH batteries.
- Battery usage Duration Eight hours continuous use
- Battery Charging Duration 2 – 3 hours to charge fully
- Volumetric Range Plastic or Glass pipette from 0.1 ml up to 200 ml
- Safety System Replaceable hydrophobic 0.45 µm PTFE filter Safety check valve
- Standard Accessories Battery Charger
- Hydrophobic PTFE membrane Filter 0.45 µm – 1Pc
- Hydrophobic PTFE membrane Filter 0.20 µm – 1Pc
- Wall mounting stand with screw Desktop stand
Accessories:
- Power Charger Desktop stand Wall mount bracket
- Two spare membrane filters: 0.2um and 0.45um
- Manual and warranty card
Packing: Box with Pipette Controller and Accessories
PlateFuge™ Microcentrifuge
- Quickly spins down droplets in PCR plates
- Unique swing-out rotor design prevents spillage (patented)
- Half the size of traditional centrifuges
- Accepts all popular types of PCR plates (skirted, semi, and non) and most microtiter plates
Benchmark’s PlateFuge™ is the first “mini” sized centrifuge with a swing out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.
In spite of its remarkably small footprint (9×10 in.), the PlateFuge™ includes a uniquely designed, swing out rotor (patent pending) capable of securing 2 microplates. The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the lid of the centrifuge, the rotor accelerates and the centrifugal force “swings” the plates into a horizontal position. Any droplets on the walls of the plate quickly concentrate into the well bottoms.
With a g-force of 600 xg, most samples can be spun down in less than 20 seconds. To end a run, simply open the lid and the automatic, electric brake brings the rotor to a quick, smooth stop in just 4 seconds. Plates can then be easily removed from the rotor.
Specifications
| Speed | 2,550 rpm/ 600 xg |
| Capacity | 2 x 2PCR Plates 2 x microtiter plates (up to 25mm) 24 x 0.2ml PCR strips |
| Deceleration | 4 Seconds |
|
Dimensions |
9.2 x 10.2 x 7.75 in. (23 x 26 x 19.7 cm) |
| Weight | 9 lbs/ 4.1 kg |
| Electrical | 115V or 230V, 50-60 Hz, 250W |
| Warranty | 2 Years |
Precellys24 is the perfect high throughput homogenizer solution for routine applications capable of operating up to 24 tubes of 2ml.
Precellys24 is the original tissue homogenizer from the Precellys range.
Its simplicity and efficiency make the Precellys24 the best homogenizer solution for routine and R&D projects.
The Precellys24 can homogenize many different samples in 30 seconds.
It possesses a unique automatic tube locking system, a real push-and-play system that makes the Precellys24 the easiest homogenizer to handle. Especially designed for L3 laboratories, the Precellys24 is used by thousands of scientists around the world. The instrument’s unique 3D motion provides the same high level of energy and homogenization efficiency to all of the tubes. The Precellys24 has the ability to process up to 24 tubes simultaneously.
Watch the Video - This sample preparation solution is not limited to soft-to-hard tissues. It allows sample preparation in 0.5mL or 2mL tubes. Fast and easy, typical homogenization time is 30 seconds for a large majority of samples!
REASONS TO CHOOSE PRECELLYS24 HOMOGENIZER
- Full application support composed of more than 2,000 scientific documents based on user experiences to determine the best protocol for your samples.
- Support is provided online 24/7 by our Application Center, or by our dedicated Application Specialists
- With 30 different lysing kits available, Precellys is the most versatile range of homogenizers.
- It allows users to homogenize, grind or lyse all sample types.
- The easy-handling features allow the Precellys to be used without advanced training
- 10 years of expertise in sample preparation and more than 30,000 scientists who use the Precellys worldwide
- A worldwide distribution network to support you wherever you are
Capacity:
- from 1 to 24 tubes of 2mL or 0.5mL
Speed range:
-
from 4,000 to 6,800 rpm increment of 100 rpm
Locking system:
- Automatic tube locking system – patented
Programs:
- 5 programs (automatically saved after use)
Number of cycles:
- from 1 to 3 cycles
Cycles time:
- from 5s to 90s
Weight:
- 65lb/30kg
Dimensions:
- Length 290mm x Width 375mm x Height 370mm (600mm with open lid)
Power requirement:
- 100 – 230 VAC / 50-60 Hz / Power 1 kVA
Noise:
- less than 70 dB
Norms:
- CE and FCC part 15 certified
Catalogue number:
- EQ03119-200-RD000.0
Benefit
Time saving:
Thanks to the powerful 3D-motion, most of the samples are fully homogenized in 30 seconds
Standardization:
The technology provides the same level of energy to all of the processed tubes. This guarantees the same quality and quantity of extraction from soft to hard tissues (micro-organisms, animal or vegetable tissues)
Easy handling:
The innovative and patented automatic tube locking system allows for easy handling of the Precellys24
Best life time:
The high quality manufacturing of the Precellys24 drastically reduces the need for maintenance and additional expenditure over the years – The Precellys24 is made in France
Protection for thermo-sensitive molecules:
The Precellys24 is compatible with the cooling unit Cryolys. This combination allows users to protect sensitive molecules when processing samples.
Precellys technology presents two main features:
1- The 8-figure 3D-motion (multi-directional) movement of the tubes. The same high level of energy given to the beads inside each tube ensures equal homogenization efficiency for all processed samples (up to 24 at once). Thanks to this complex movement, the Precellys Evolution can disrupt any type of sample (even the hardest) in seconds with perfect reproducibility while limiting heat generation.
2- The patented locking vacuum system of the tubes during the process. The Press’n block system saves time and energy. It makes it easier to handle equipment and secures the tubes before the grinding process.
Abstracts of some application notes related to Precellys24.
To access all application notes and full versions, visit the Application Center.
- DNA Extraction from Rice Grain, Kogene Biotech Co – South Korea, Agronomy (code: 03712-810-DU013)
- Metabolomic study from clam gill, Key Laboratory of Coastal Zone Environment Processes, CAS; Shandong Provincial Key Laboratory of Coastal Zone Environment Processes, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai, China, Animal & Aquaculture science (code: 03712-810-DU044)
- Assessment of Salmonella Typhimurium load within infected nematodes, School of Biosciences, University of Birmingham, Birmingham, UK., Biomedical & Health sciences (code: 03712-810-DU060)
Accessories
- Precellys 24 maintenance kit
- The Precellys 24 maintenance kit enhances the life time of your Precellys 24 equipment.
Syringe Tips, 0.50ml, Non-Sterile
Syringe Tips fit all repeating pipettes using standard sized syringe tips. Tips are manufactured from virgin polypropylene and high-density polyethylene without lubricants or chemical additives to prevent reagent contamination.
Manufactured from High Quality Materials the syringe Tips are made entirely from high-quality virgin polyethylene and polypropylene without lubricants or other chemical additives.
Packing: 1 Bag of 100 pieces
Universal, compact, versatile and quiet, are concepts which define the Unicen 21. Essential on demanding labs which need a reliable result on a short time, without scarifying the number of samples.
Max capacity 4 tubes of 100 ml, reach up to 4.200 RPM/ 2.899 xg, with 9 interchangeable rotors and up to 40 set of different adapters, covering the basical requirement on separation of clinics, industries, research centers, …
Speed and time are shown on digital displays easily readable, and lid can be open automatically at the end of the run, allowing to the operator a higher autonomy on routine process.
It’s provided of safety systems essentials for a safety processing, with brushless engine maintenance free, unbalance switch off, chamber in stainless steel, lid lock motorized…
Ideal for run a reduced number of samples, it’s undoubtedly the most appropriated choice for emergency labs, due to its reduce the time on sample preparation.
Simplifying separation.
User Friendliness
- LED screen shown RPM/RCF (on steps 100 RPM/10xg) and time.
- Intuitive handling through start, stops, short spin and play keys.
- Rotor list on memory.
- Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
- Short spin key with speed adjustable.
- Acceleration and braking selectable by operator
- Automatic open lid.
- Last values remain on memory.
- Lid latch lock.
- Microprocessor controlled.
- Option: free or locked adjustment of RPM/RCF along the run.
Features
- Induction motor maintenance free.
- Max. capacity 4 x 100 ml.
- Speed, up to 4.200 RPM / 2.899 xg.
- Quiet: noise level < 60 dB.
Safety
- Lid locking and holding.
- Imbalance switch off.
- Manual overriding.
- Chamber of centrifugation in stainless steel.
- Viewing and calibration port in the lid.
- Several messages keep the operator informed about the device situation.
- Guard ring between the chamber of centrifugation and the housing.
- Forced ventilation which reduces the temperature increase.
- Lid dropping protection.
Standards and EC Directives
EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.
Versions
|
Code |
Dimensions (mm)(w x d x h) |
Net weight (Kg) |
Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
||
|
CE 126 |
410 |
530 |
320 |
36 |
220-240 |
50-60 |
200 |
|
CE 127 |
410 |
530 |
320 |
36 |
110-120 |
50-60 |
200 |
Accessories
The FlatSpin is an ultra-flat compact stirrer ideal for stirring applications. Its space-saving design minimizes bench space and is portable due to its lightweight.
Features:
- Speed range 15-1000rpm
- Automatic reverse rotation for excellent stirring
- Chemically resistant plate
- Slip-proof and stable multi-voltage
- TUVus approved
- CE Marked
Specifications:
- Stirring speed: 15-1000rpm
- Maximum viscocity: 40 cP / m
- PasMaximum load:2.2lbs
- Maximum volume: 0.8L
- Plate diameter: 3.5inches
- Plate material: ABS
- Dimensions: 7"L x 5"W x 0.6"H
- Weight: 1lbs
- Voltage: 100-240Volts, 50/60Hz