Products
Temperature maintenance racks.
- Consistent thermal protection.
- One side holds up to (20) 2.0 ml tubes, and the other side holds up to (20) 0.5 ml tubes.
- Robust polycarbonate manufacture.
- Tough Polycarbonate material.
- Blue -20ºC unit will maintain a temperature between -10º and -20ºC for up to three hours.
- Racks are filled with an inert, non-toxic gel.
- Dimensions: 108 × 172 × 104mm
Packing: 1 Individual unit with Lid
- Consistent thermal protection.
- One side holds up to (20) 2.0 ml tubes, and the other side holds up to (20) 0.5 ml tubes.
- Robust polycarbonate manufacture.
- Tough Polycarbonate material.
- Blue -20ºC unit will maintain a temperature between -10º and -20ºC for up to three hours.
- Racks are filled with an inert, non-toxic gel.
- Dimensions: 108 × 172 × 104mm
Packing: 1 Individual unit with Lid
- Adheres to any dry surface – glass, plastic, metal, paper, and rubber.
- Sticks throughout the most demanding procedures – is oil proof, waterproof, and acid-resistant – can be steam autoclaved.
- Holds in a wide range of temperatures – transfers cleanly from one surface to another, leaving no messy residue.
- Accepts handwritten notations with pen, pencil, or marker, or order pre-printed to your specifications.
- Size: 1/2″ x 500″
- Material: TAPE
- Adhesive: REMOVABLE
- Core Size: 1″
- Unit of Measure: RL
- Quantity per UoM: 12.5″
Packing: 1 Pack with 6 Rolls
- Adheres to any dry surface – glass, plastic, metal, paper, and rubber.
- Sticks throughout the most demanding procedures – is oil proof, waterproof, and acid-resistant – can be steam autoclaved.
- Holds in a wide range of temperatures – transfers cleanly from one surface to another, leaving no messy residue.
- Accepts handwritten notations with pen, pencil, or marker, or order pre-printed to your specifications.
- Size: 1/2” x 500″
- Material: TAPE
- Adhesive: REMOVABLE
- Core Size: 1″
- Unit of Measure: RL
- Quantity per UoM: 12.5″
Packing: 1 Pack with 6 Rolls
- Adheres to any dry surface – glass, plastic, metal, paper, and rubber.
- Sticks throughout the most demanding procedures – is oil proof, waterproof, and acid-resistant – can be steam autoclaved.
- Holds in a wide range of temperatures – transfers cleanly from one surface to another, leaving no messy residue.
- Accepts handwritten notations with pen, pencil, or marker, or order pre-printed to your specifications.
- Size: 3/4″” x 500″”
- Material: TAPE
- Adhesive: REMOVABLE
- Core Size: 1″”
- Unit of Measure: RL
- Quantity per UoM: 12.5″
Packing: 1 Pack of 4 Rolls
- Adheres to any dry surface – glass, plastic, metal, paper, and rubber.
- Sticks throughout the most demanding procedures – is oil proof, waterproof, and acid-resistant – can be steam autoclaved.
- Holds in a wide range of temperatures – transfers cleanly from one surface to another, leaving no messy residue.
- Accepts handwritten notations with pen, pencil, or marker, or order pre-printed to your specifications.
- Size: 3/4″” x 500″”
- Material: TAPE
- Adhesive: REMOVABLE
- Core Size: 1″
- Unit of Measure: RL
- Quantity per UoM: 12.5"
Packing: 1 Pack of 4 Rolls
- Adheres to any dry surface – glass, plastic, metal, paper, and rubber.
- Sticks throughout the most demanding procedures – is oil proof, waterproof, and acid-resistant – can be steam autoclaved.
- Holds in a wide range of temperatures – transfers cleanly from one surface to another, leaving no messy residue.
- Accepts handwritten notations with pen, pencil, or marker, or order pre-printed to your specifications.
- Size: 3/4” x 500″
- Material: TAPE
- Adhesive: REMOVABLE
- Core Size: 1″
- Unit of Measure: RL
- Quantity per UoM: 12.5″
Packing: 1 Pack of 4 Rolls
Overview
Uniscience LE Agarose is a low EEO, multi-purpose, standard melting point agarose that yields high-resolution sharp DNA bands with high clarity and low background. Its optimized gel strength enhances the ease of gel processing and handling. Manufactured using innovative Organic Solvent Free Manufacturing process deal for routine DNA and RNA gel electrophoresis and blotting
Specification
- Multi-purpose
- Appearance White to off-white powder
- EEO ≤ 0.13
- Gelling Point: 36 +/- 1.5 Degrees C (1.5% gel)
- Melting Point: 88 +/- 1.5 Degrees C (1.5% gel)
- Solubility Clear colorless solution at 1g in 100ml water
- Moisture: ≤ 10%
- Gel Strength: ≥ 1200 g/cm2 (1% Gel)
- Sulfate: ≤ 0.15%
- Ash: ≤ 0.5%
- Impurities: (DNase, RNase, Protease, and Endonuclease) None Detected
Packing: 100g
Uniscience LE Agarose is a low EEO, multi-purpose, standard melting point agarose that yields high-resolution sharp DNA bands with high clarity and low background. Its optimized gel strength enhances the ease of gel processing and handling. Manufactured using innovative Organic Solvent Free Manufacturing process deal for routine DNA and RNA gel electrophoresis and blotting
Specification
- Multi-purpose
- Appearance White to off-white powder
- EEO ≤ 0.13
- Gelling Point: 36 +/- 1.5 Degrees C (1.5% gel)
- Melting Point: 88 +/- 1.5 Degrees C (1.5% gel)
- Solubility Clear colorless solution at 1g in 100ml water
- Moisture: ≤ 10%
- Gel Strength: ≥ 1200 g/cm2 (1% Gel)
- Sulfate: ≤ 0.15%
- Ash: ≤ 0.5%
- Impurities: (DNase, RNase, Protease, and Endonuclease) None Detected
Packing: 100g
Overview
Uniscience LE Agarose is a low EEO, multi-purpose, standard melting point agarose that yields high-resolution sharp DNA bands with high clarity and low background. Its optimized gel strength enhances the ease of gel processing and handling. Manufactured using innovative Organic Solvent Free Manufacturing process deal for routine DNA and RNA gel electrophoresis and blotting
Specification
- Multi-purpose
- Appearance White to off-white powder
- EEO ≤ 0.13
- Gelling Point: 36 +/- 1.5 Degrees C (1.5% gel)
- Melting Point: 88 +/- 1.5 Degrees C (1.5% gel)
- Solubility Clear colorless solution at 1g in 100ml water
- Moisture: ≤ 10%
- Gel Strength: ≥ 1200 g/cm2 (1% Gel)
- Sulfate: ≤ 0.15%
- Ash: ≤ 0.5%
- Impurities: (DNase, RNase, Protease, and Endonuclease) None Detected
Packing: 500g
Uniscience LE Agarose is a low EEO, multi-purpose, standard melting point agarose that yields high-resolution sharp DNA bands with high clarity and low background. Its optimized gel strength enhances the ease of gel processing and handling. Manufactured using innovative Organic Solvent Free Manufacturing process deal for routine DNA and RNA gel electrophoresis and blotting
Specification
- Multi-purpose
- Appearance White to off-white powder
- EEO ≤ 0.13
- Gelling Point: 36 +/- 1.5 Degrees C (1.5% gel)
- Melting Point: 88 +/- 1.5 Degrees C (1.5% gel)
- Solubility Clear colorless solution at 1g in 100ml water
- Moisture: ≤ 10%
- Gel Strength: ≥ 1200 g/cm2 (1% Gel)
- Sulfate: ≤ 0.15%
- Ash: ≤ 0.5%
- Impurities: (DNase, RNase, Protease, and Endonuclease) None Detected
Packing: 500g
Maximum capacity [Max]: 50g
Readability [d]: 1mg
Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for small samples of different materials. MA.R series redefines moisture analyzers standards. This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones.
The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi®. The moisture analyzer is housed in a plastic casing.
Databases:
Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis.
Collected data is registered in 6 databases:
- Users (up to 10 users)
- Products (up to 1000 products)
- Weighings (up to 1000 weighings)
- Tares (up to 100 tares)
- Programs (up to 100 drying programs)
- Drying process reports (up to 1000 reports)
Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks.
Direct access to information
It is possible to access functions and databases directly, using keyboard soft keys.
Database – access to databases
Function – access to basic functions
F1 and F2 – programmable function keys and menu navigation keys
Reports – access to database of drying process reports
Profile – access to parameters settings
Sample – access to products database
Maximum capacity [Max]: 50g
Readability [d]: 1mg
MA X2 moisture analyzers are hi-tech measuring instruments intended for quick determination of relative moisture content, dry mass content and other parameters in samples of different substances.
MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors
Such solution allows:
- Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing.- Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity.
- Achieving high repeatability of opening and closing the drying chamber.
- Enhancing drying process automation.
- Enhancing safety of operation by eliminating contact with hot components of drying chamber.
- Improving operation ergonomics.
MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product.
HIGHLIGHTS OF X2 SERIES MOISTURE ANALYZERS:
- Automatic opening and closing of the drying chamber
- 5” capacitive colour touchpad
- Modern interface
- Uncomplicated, intuitive operation
- Programmable display
- Drying profiles (standard, mild, step, fast)
- GLP/GMP printouts-reports
- Repeatable and customized applications
- Work optimization due to the use of halogen lamps
MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature).
An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather.
DATABASES:
Information system of X2 series moisture analyzers is based on 6 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis.
Collected data is registered in 8 databases:
- Products (up to 5000 products)
- Users (up to 100 users)
- Packaging (up to 100 packaging)
- Customers(up to 1000 customers)
- Drying programs (up to 200 drying programs)
- Drying process reports (up to 5000 drying process reports)
- Ambient conditions (up to 10000 records)
- Weighings (up to 50000 records)
USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.
Maximum capacity [Max]: 50g
Readability [d]: 0.1mg
MA X2 moisture analyzers are hi-tech measuring instruments intended for quick determination of relative moisture content, dry mass content and other parameters in samples of different substances.
MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors
Such solution allows:
- Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing.
- Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity.
- Achieving high repeatability of opening and closing the drying chamber.
- Enhancing drying process automation.
- Enhancing safety of operation by eliminating contact with hot components of drying chamber.
- Improving operation ergonomics.
MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product.
HIGHLIGHTS OF X2 SERIES MOISTURE ANALYZERS:
- Automatic opening and closing of the drying chamber
- 5” capacitive colour touchpad
- Modern interface
- Uncomplicated, intuitive operation
- Programmable display
- Drying profiles (standard, mild, step, fast)
- GLP/GMP printouts-reports
- Repeatable and customized applications
- Work optimization due to the use of halogen lamps
MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature).
An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather.
DATABASES:
Information system of X2 series moisture analyzers is based on 6 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis.
Collected data is registered in 8 databases:
- Products (up to 5000 products)
- Users (up to 100 users)
- Packaging (up to 100 packagings)
- Customers(up to 1000 customers)
- Drying programs (up to 200 drying programs)
- Drying process reports (up to 5000 drying process reports)
- Ambient conditions (up to 10000 records)
- Weighings (up to 50000 records)
USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.
Magnus 22
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
Regarding floor standing equipment, Magnus 22 offers the maximum perShapence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of useful space. Its ergonomic design allows easy access to the rotor as well as traceability of the positioning to balance the load and ease of identification. Its colour TFT touch screen offers perShapence that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled.
It has a wide range of accessories for 750 ml. tubes, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical applications.
Features
TFT color touch screen, visible from more than 3 m.:
- Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing.
- Automatic disconnection for energy saving up to 8 h., with deactivation option.
Standards and Directivies
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Versions
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
|||
| CE 191 | 540 | 650 | 930 | 113 | 220-230 | 50-60 | 1020 |
| CE 192 | 540 | 650 | 930 | 113 | 110-120 | 50-60 | 1020 |
Compatible Rotors
Magnus 22
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
The refrigerated version of our floor standing equipment offers the maximum perShapence for your processes. Its design enables it to be installed in any space in the lab, avoiding the occupation of useful space. Its ergonomic design allows easy access to the rotor as well as traceability of the positioning to balance the load and easy identification.
With a wide range of accessories that offers capacities for tubes of 750 ml., micro-plates, micro-tubes and a great number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml. for clinical applications. It also has a specific rotor for blood bags and tubes extraction. Its powerful refrigeration system enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected. This characteristic gives the user confidence in traceability during the centrifugation cycle.
Features
TFT color touch screen, visible from more than 3 m.
- Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalancing location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based in accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
- 40 programmable memories, with protection under password.
- Several acoustic and visual messages warning the user the device situation.
User Friendliness
- Microprocessor controlled. PC connection.
- Induction motor maintenance free (brushless).
- Rotors and adapters list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed.
- Rotors and adapters autoclavable, easy to install by the user.
- Automatic disconnection for energy saving up to 8 h.
Cooling
- Remains the refrigeration after centrifugation process.
- Precooling program with rotor spinning and temperature selectable.
- Guarantee 4 °C at maximum RPM.
- Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
- Temperature sensor inside the chamber.
- Gas R 449A HFO (CFC free).
Standards and Directivies
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Versions
| Dimensions (mm)(w x d x h) | Net weight (Kg) | Voltage (V) |
Frecuency (Hz) |
Consumption (W) |
Z max Advisable(Hz) | |||
| CE 193 | 540 | 650 | 930 | 145 | 220-230 | 50-60 | 1050 | <| 0.446 | |
| CE 194 | 540 | 650 | 930 | 145 | 110-120 | 50-60 | 1050 | <| 0.446 | |
This Workstation includes 4 multi-sided racks with rotating and locking mechanisms and is excellent for multitasking. With the Revolver, you can add or subtract units to the workstation to suit your needs and quickly reconfigure the workstation for different tubes sizes and types. The workstation accommodates 0.50ml, 1.50ml, and 2.0ml tubes; 15ml and 50ml tubes; and PCR plates, tubes, and tube strips.
- Add or subtract rack units to suit your needs.
- PCR plate configuration.
- Rotate and lock mechanism.
- Fast Reconfiguration for different tube sizes and types.
- Material: Polypropylene.
- Temp range -80°C to +121°C.
- Autoclavable. Colors: Green, Blue, Red, Yellow
Use:
2 50ml Tubes, 8 15ml Tubes, 12 1.5/2ml Tubes, 6 0.5ml Tubes,48 0.2ml Tubes, 1 PCR Plates with 2 units 6 8-Strip Tubes or 8 12-Strip Tubes with 2 units.
Dimensions: 4.3 x 4.3 x 2.7 in. 108 x 108 x 69 mm
Packing: 4 rack blocks per unit (as shown in picture)
- Add or subtract rack units to suit your needs.
- PCR plate configuration.
- Rotate and lock mechanism.
- Fast Reconfiguration for different tube sizes and types.
- Material: Polypropylene.
- Temp range -80°C to +121°C.
- Autoclavable. Colors: Green, Blue, Red, Yellow
Use:
2 50ml Tubes, 8 15ml Tubes, 12 1.5/2ml Tubes, 6 0.5ml Tubes,48 0.2ml Tubes, 1 PCR Plates with 2 units 6 8-Strip Tubes or 8 12-Strip Tubes with 2 units.
Dimensions: 4.3 x 4.3 x 2.7 in. 108 x 108 x 69 mm
Packing: 4 rack blocks per unit (as shown in picture)
The new Microcen 24 bursts as the solution for all those laboratories which are looking for high performance and versatility in a small centrifuge. Allows work with up to 8 conical tubes of 15 ml. as well as other configurations, as its available rotors can be exchanged easily. This equipment includes a rotor with capacity for 8 tubes of 15 ml. round bottom and has an optional range of rotors and adapters.
Features
LED screen:
- Shows RPM/ RCF and time.
- Speed programming in 50 RPM/ 10 xg steps.
- Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
- Timer from 1 to 99 min. programmable in 1 min. steps and hold position.
- Acceleration and deceleration control in 3 steps: fast, soft and free.
- Acoustic and visual messages on screen warning the user the equipment Status
Easy to use
- Microprocessor controlled.
- Induction motor maintenance free (brushless).
- Rotors list on memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Option of free/locked adjustment of RPM/ RCF along the run.
- Automatic open lid, programmable.
- Last values remain in memory.
- Over-speed protection.
Safety
- Lid provided with security systems:
- Automatic lid lock system, motorized. Emergency lid-lock release.
- Locking and protection against opening along the run.
- Lid dropping protection.
- Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors and adapters autoclavable, easy to install by the user.
- Forced ventilation to reduce temperature increasing
- Automatic disconnection for energy saving, with deactivation option.
EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
Max. capacity: 10 x 15 ml. Max. speed: 6.368 xg / 8.000 RPM
Versions
This code includes the next configuration:
Centrifuge Microcen 24 + angle fixed rotor RT 246 with capacity for 8x15 ml.
In the next chart you can find a range of accessories (rotors and adapters) that will increase the versatility of this configuration.
Accessories
