- Graduated Conical Base Centrifuge Tubes
- High clarity medical-grade polymer. 
- Graduations at 1 ml
- Autoclavable using standard sterilization procedure (15 minutes at 121°C and 15psi).
- Wide temperature range (minimum (storage only) -80°; maximum 40°C).
- Tubes are sterile and free from DNase, RNase, DNA, PCR inhibitors & endotoxins.
- Tube racks are recyclable.

Packing: 1 rack with 25 tubes per unit

- Convenient freezer storage.
- Unique pull tab.
- Clear printed grid.
- Fits in standard freezer racking.
- Polypropylene.
- Operating Temperature: -90°C min to +121°C max (autoclavable).
- Suitable for permanent markers.

Description: 15 ml × 36 place rack
Dimensions: 144 × 144 × 127mm 102mm without lid
Color: green

Packing: 2 Racks with Lid per unit. (Rack only - No Tubes)

Sterile Five-O™ 5mL MacroTubes™ w/ attached screw caps in foam racks

New 5mL Five-O™ Macro Tubes™ takes all of the conveniences of standard 15mL conical tubes and scales them down for space efficiency and decreased natural resource consumption. Useful from -86°C to 110°C, these tubes are a valuable resource for boiling and for sample preservation at very low temperatures. Choose from gamma sterilized racked packaging with attached caps or non-sterile bulk packaging with separate caps. The foam racks are similar to the packaging normally associated with 15mL tubes (upright with caps attached), but they require about 60% less storage space.

- Compatible with standard equipment
- Centrifuge at up to 25,000xg
- RNase, DNase & pyrogen free
- Unsurpassed Clarity
- Dual graduations at every 0.2mL and 0.5mL

Packing: 1 Rack of 50 tubes

- Manufactured from High-Density Polyethylene.
- More accurate than serological pipettes when measuring large volumes of solution.
- DNase, RNase, DNA, PCR inhibitors, and endotoxin-free Autoclavable.
- Less Fluid Retention Less Sample Loss Less Time Spent Less Plastic Wasted

Specification:
Volume: 5 ml
Description: Bulk, Un-filtered
Color: Natural

Packing: 1 bag of 250 tips

- Manufactured from High-Density Polyethylene.
- Filter acts as a barrier to protect the nose cone of pipettor and sample from contamination but does not impede airflow.
- Filter material is hydrophobic and does not contain additives that can contaminate; nor will it absorb samples.
- DNase, RNase, DNA, PCR inhibitors, and endotoxin-free Autoclavable.
- Less Fluid Retention Less Sample Loss Less Time Spent Less Plastic Wasted

Specification:
Volume: 5 ml
Description: Racked, sterile, filtered
Color: Natural

Packing: 1 Rack with 50 tips

- Manufactured from High-Density Polyethylene.
- More accurate than serological pipettes when measuring large volumes of solution.
- DNase, RNase, DNA, PCR inhibitors, and endotoxin free Autoclavable.
- Less Fluid Retention Less Sample Loss Less Time Spent Less Plastic Wasted

Specification:
Volume: 5 ml
Description: Racked, sterile, Un-filtered
Color: Natural

Packing: 1 Rack with 50 tips

- Loose 8 Cap Strips Polypropylene SBS dimensions.
- Ideal for automation / HTS. 8 × 12 format.
- Individual tubes, strips of 8 tubes, and strips of 12 tubes.
- Polypropylene is used for tubes and racks. Strip Caps are polyethylene.

Ideal for:
Storage, dilution, mixing, harvesting, culture assays, screening.

This rack and tube system is equally suitable as a reaction vessel in your robotic workstation or as a long-term storage vessel in your sample library.

A clear rack lid is a standard part of this system package. Strip caps are also available.

Packing: 1 bag with 125 Caps

- Flat Strip Caps Manufactured with virgin, medical-grade polypropylene.
- Strips of flat or dome caps.
- Optically clear for (real-time) qPCR.
- DNase, RNase, DNA, endotoxin, and PCR inhibitor-free. Flat cap, strips of 8

Packing: 1 bag with 125pcs of Caps

For easy inventory management of cryogenic storage vials used in cell culture, pharmaceutical research, and other biotechnology labs Store in mechanical freezers or liquid nitrogen Boxes are vented, allowing rapid cooling of contents and full drainage Made of tough polycarbonate for use with temperatures from -196°C to +121°C Transparent lids for PC boxes have a numbered grid for quick sample identification Chemically resistant to alcohols and mild organic solvents

- 9x9 well storage (81-wells total)
- PC boxes with 4 assorted colors: red, yellow, green, and blue
- Holds 0.5ml, 1.5ml, or 2.0ml microtubes and cryogenic vials
- PC box with Removable lid includes a numbered grid for orientation
- Format: 9 rows x 9 columns
- Dimensions: 133 x 133 x 54mm
- Max Tube Dimensions: 12mm diameter, 49mm high

Packing: 1 box with 5 units

- 0.3ml max. well volume (when used with adhesive and heat seals)
- Black grid reference for easy sample identification
- Cut-off corner for plate orientation
- Compatible with many major thermal cyclers
- Clear wells for improved sample visibility
- Raised well rims avoid cross contamination and facilitate heat sealing Specification
- Clean-room produced
- Thin-wall design
- Free from human DNA, RNases and DNases
- Leak tested
- Autoclavable
- Compatible with our domed cap strips and flat cap strips Heat sealing and adhesive sealing options available

Packing: 10 Plates

- 0.3ml max. well volume (when used with adhesive and heat seals)
- Black grid reference for easy sample identification
- Cut-off corner for plate orientation
- Compatible with many major thermal cyclers
- Clear wells for improved sample visibility
- Raised well rims avoid cross-contamination and facilitate heat sealing Specification
- Clean-room produced
- Thin-wall design
- Free from human DNA, RNases, and DNases
- Leak tested
- Autoclavable
- Compatible with our domed cap strips and flat cap strips Heat sealing and adhesive sealing options are available

Packing: 10 Plates

- Universal fit to standard 96 well blocks; a polypropylene plate with 0.25 ml wells, black grid reference, and a cut corner at H12 Specification
Compatible with universal standard block thermal cyclers and sequencers Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT, qPCR) results
- Maximum thermal conductivity for efficient heat transfer and precise thermal cycling
- Raised well rims prevent cross-contamination and facilitate effective sealing for reduced evaporation
- Super clear wells maximize sample visibility Compatible with standard multichannel pipettes
- Subject to a strict QC procedure which includes a visual check and leak testing of every tube Standard 0.25 ml (250 µl) working volume, with a 0.3 ml (300 µl) total volume when used with sealing option
- White plate ideal for qPCR, giving optimal signal-to-noise ratio for fluorescence-based assays

Packing: 50 Plates

- Plates have thin walls for excellent thermal transfer in PCR procedures
- The 96 well configuration makes them compatible with 96 well thermal cyclers.
- Can be sealed with adhesive sealing films or cap strips.

Plate Type: Chimney Top, Standard

Packing: 10 Plates

 

This transparent polyester-based film has a medium-strength adhesive. It is designed as a low-cost sealing option and useful for temporary storage and as a cover for applications such as centrifugation. And tabs allow for easy application and removal. This seal is removable without residue on the plate. Specification

- Non-pierceable
- Peelable
- Seal integrity range: -20°C to 80°C
- Application: Sample storage (aqueous)
- Sheets: 135mm x 80mm
- Roll: 110m x 80mm

Packing: 100 Sheets