Products
- More accurate than serological pipettes when measuring large volumes of solution.
- DNase, RNase, DNA, PCR inhibitors, and endotoxin-free Autoclavable.
- Less Fluid Retention Less Sample Loss Less Time Spent Less Plastic Wasted
Specification:
Volume: 5 ml
Description: Bulk, Un-filtered
Color: Natural
Packing: 1 bag of 250 tips
- Filter acts as a barrier to protect the nose cone of pipettor and sample from contamination but does not impede airflow.
- Filter material is hydrophobic and does not contain additives that can contaminate; nor will it absorb samples.
- DNase, RNase, DNA, PCR inhibitors, and endotoxin-free Autoclavable.
- Less Fluid Retention Less Sample Loss Less Time Spent Less Plastic Wasted
Specification:
Volume: 5 ml
Description: Racked, sterile, filtered
Color: Natural
Packing: 1 Rack with 50 tips
- Manufactured from High-Density Polyethylene.
- More accurate than serological pipettes when measuring large volumes of solution.
- DNase, RNase, DNA, PCR inhibitors, and endotoxin free Autoclavable.
- Less Fluid Retention Less Sample Loss Less Time Spent Less Plastic Wasted
Specification:
Volume: 5 ml
Description: Racked, sterile, Un-filtered
Color: Natural
Packing: 1 Rack with 50 tips
- 0.1 and 0.2ml 8-Strip with separate cap-strip capping
- 0.1 and 0.2ml 8-Strip with separate cap-strip decapping
- 0.2ml 8-Strip with attached cap decapping
- 0.2ml PCR single tube decapping
- 1.5/1.7ml microcentrifuge tube decapping
- Adhesive film Scrapping to ensure tight adhesion between film and PCR plate
Packaging: 1 Unit/pack
- Loose 8 Cap Strips Polypropylene SBS dimensions.
- Ideal for automation / HTS. 8 × 12 format.
- Individual tubes, strips of 8 tubes, and strips of 12 tubes.
- Polypropylene is used for tubes and racks. Strip Caps are polyethylene.
Ideal for:
Storage, dilution, mixing, harvesting, culture assays, screening.
This rack and tube system is equally suitable as a reaction vessel in your robotic workstation or as a long-term storage vessel in your sample library.
A clear rack lid is a standard part of this system package. Strip caps are also available.
Packing: 1 bag with 125 Caps
- Flat Strip Caps Manufactured with virgin, medical-grade polypropylene.
- Strips of flat or dome caps.
- Optically clear for (real-time) qPCR.
- DNase, RNase, DNA, endotoxin, and PCR inhibitor-free. Flat cap, strips of 8
Packing: 1 bag with 125pcs of Caps
- 9x9 well storage (81-wells total)
- PC boxes with 4 assorted colors: red, yellow, green, and blue
- Holds 0.5ml, 1.5ml, or 2.0ml microtubes and cryogenic vials
- PC box with Removable lid includes a numbered grid for orientation
- Format: 9 rows x 9 columns
- Dimensions: 133 x 133 x 54mm
- Max Tube Dimensions: 12mm diameter, 49mm high
Packing: 1 box with 5 units
FEATURES:
- Operating Temperature -80 ~ 120℃
- PCR or Storage use
- Strongly adhesive
- Free of DNase, RNase, DNA, PCR Inhibitor, ATP, Endotoxin.
- All products are ready to use in PCR
- Evaporation rate below 5%, saving cost on reagents
- Small package can avoid contamination by different researchers
Packing: 100 Membrane/Box
- Universal fit to standard 96 well blocks; a polypropylene plate with 0.25 ml wells, black grid reference, and a cut corner at H12 Specification
Compatible with universal standard block thermal cyclers and sequencers Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT, qPCR) results
- Maximum thermal conductivity for efficient heat transfer and precise thermal cycling
- Raised well rims prevent cross-contamination and facilitate effective sealing for reduced evaporation
- Super clear wells maximize sample visibility Compatible with standard multichannel pipettes
- Subject to a strict QC procedure which includes a visual check and leak testing of every tube Standard 0.25 ml (250 µl) working volume, with a 0.3 ml (300 µl) total volume when used with sealing option
- White plate ideal for qPCR, giving optimal signal-to-noise ratio for fluorescence-based assays
Packing: 50 Plates
- Pierceable silicon rubber sealing mat
- Suitable for heat sealing Specification:
Material: Silicone
Dimensions: Total length of 4.67” total width of 2.90”
Packing: 5pcs of silicone Cap Mat
- Plates have thin walls for excellent thermal transfer in PCR procedures
- The 96 well configuration makes them compatible with 96 well thermal cyclers.
- Can be sealed with adhesive sealing films or cap strips.
Plate Type: Chimney Top, Standard
Packing: 10 Plates
- Broad thermal cycler compatibility.
- High-contrast, black alphanumeric indexing for easy well identification.
- Crystal-clear wells to easily verify sample volume.
- Ultra-thin, uniform wells ensure optimal heat transfer for high reaction efficiency.
- Well ridges reduce sample evaporation when sealing with film, foil, or strip caps.
- Manufactured from high-clarity, ultra-pure polypropylene (meets FDA 21 CFR 177.1520 & USP Class VI).
- Non-skirted item is also available in 24 and 48 well size options. Please inquire for more details.
- Certified free of detectable DNase, RNase, DNA, PCR inhibitors, and tested pyrogen-free.
Packing: 20 Plates
This transparent polyester-based film has a medium-strength adhesive. It is designed as a low-cost sealing option and useful for temporary storage and as a cover for applications such as centrifugation. And tabs allow for easy application and removal. This seal is removable without residue on the plate. Specification
- Non-pierceable
- Peelable
- Seal integrity range: -20°C to 80°C
- Application: Sample storage (aqueous)
- Sheets: 135mm x 80mm
- Roll: 110m x 80mm
Packing: 100 Sheets
