Uni-Max Vertical Electrophoresis System - Maxi Wave - Uniscience

Uni-Max Vertical Electrophoresis System - Maxi Wave - Uniscience - Uniscience Corp.
Regular price $1,154.99 (UNI-E03221)

The Maxi WAVE Vertical Electrophoresis System is our latest product innovation for large-format vertical gel electrophoresis. Designed to perform a variety of separations, including first-and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the MV-20WAVESYS is one of the most versatile maxi vertical systems available. By introducing innovative, new vertical screw-clamp technology within the PAGE insert only four screws are now necessary to secure as many 20x20 gels. This gives the MV20 WAVE system the elective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates. In addition, the WAVE's vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the center to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design of the PAGE insert aids both handling and set up.

Features

  • More gels-run 2 to 4 gels simultaneously
  • Customize your system-for second-dimension runs with 18cm IPG strips and gels using the IEF conversion kit
  • Utilize modular inserts-with the same universal tank and lid to extend the application of your standard WAVE unit to create a complete 2-D or   blotting system.
  • Vertical screw-clamps distribute pressure evenly along the height of the gel to prevent plate bowing and gel compression
  • Glass plates compress gently against a flat, level gasket to prevent current leakage from the inner buffer chamber during electrophoresis
  • Detachable inner cooling coil connects to the laboratory water supply or a recirculating chiller to provide uniform, smile-free electrophoresis, while     allowing runs to be performed at higher voltage
  • Deep gel tank with adequate clearance beneath the glass plates to allow a magnetic stirrer to maintain buffer recirculation and uniform pH
  • Dual purpose PAGE insert eliminates time-consuming transfer of glass plates between separate casting and running modules
  • Ground glass plates with bonded injection moulded spacers consistent with comb thickness ensure "clean" well formation, as well as the correct alignment for leak-free casting; also eliminate the need for easily mislaid and awkward to use spacer aligners
  • Ultra-soft silicone mat within cam-caster compensates for glass plate misalignment to ensure leak-free casting
  • Widest selection of combs allow separation of up to 192 samples
  • Asymmetric lid design and color-coded screw pins in PAGE insert prevent polarity reversal

Specifications

Dimension (WxLxH)

Approx. 11.81"x7.08"x10.93" (300x180x270mm)

Plate dimension (WxL)

7.87"x7.87" (200x200mm)

Gel dimension (WxL)

6.3"x6.89" (160x175mm)

Maximum sample

192 samples, 48 samples per gel

Buffer volume

0.32-1.48gal (1200 - 5600ml)

Cooling method

Cooling coil

Dummy plate and casting base

Yes

Material

Injection molded construction

 

Durable, leak proof environment for complete safety and long life

Electrical safety

Lid can only be fastened in one way

 

On removal, power is disconnected from buffer chamber

Rapid casting gel

Use casting dams


The Maxi WAVE Vertical Electrophoresis System is our latest product innovation for large-format vertical gel electrophoresis. Designed to perform a variety of separations, including first-and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the MV-20WAVESYS is one of the most versatile maxi vertical systems available. By introducing innovative, new vertical screw-clamp technology within the PAGE insert only four screws are now necessary to secure as many 20x20 gels. This gives the MV20 WAVE system the elective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates. In addition, the WAVE's vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the center to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design of the PAGE insert aids both handling and set up.

Features

  • More gels-run 2 to 4 gels simultaneously
  • Customize your system-for second-dimension runs with 18cm IPG strips and gels using the IEF conversion kit
  • Utilize modular inserts-with the same universal tank and lid to extend the application of your standard WAVE unit to create a complete 2-D or   blotting system.
  • Vertical screw-clamps distribute pressure evenly along the height of the gel to prevent plate bowing and gel compression
  • Glass plates compress gently against a flat, level gasket to prevent current leakage from the inner buffer chamber during electrophoresis
  • Detachable inner cooling coil connects to the laboratory water supply or a recirculating chiller to provide uniform, smile-free electrophoresis, while     allowing runs to be performed at higher voltage
  • Deep gel tank with adequate clearance beneath the glass plates to allow a magnetic stirrer to maintain buffer recirculation and uniform pH
  • Dual purpose PAGE insert eliminates time-consuming transfer of glass plates between separate casting and running modules
  • Ground glass plates with bonded injection moulded spacers consistent with comb thickness ensure "clean" well formation, as well as the correct alignment for leak-free casting; also eliminate the need for easily mislaid and awkward to use spacer aligners
  • Ultra-soft silicone mat within cam-caster compensates for glass plate misalignment to ensure leak-free casting
  • Widest selection of combs allow separation of up to 192 samples
  • Asymmetric lid design and color-coded screw pins in PAGE insert prevent polarity reversal

Specifications

Dimension (WxLxH)

Approx. 11.81"x7.08"x10.93" (300x180x270mm)

Plate dimension (WxL)

7.87"x7.87" (200x200mm)

Gel dimension (WxL)

6.3"x6.89" (160x175mm)

Maximum sample

192 samples, 48 samples per gel

Buffer volume

0.32-1.48gal (1200 - 5600ml)

Cooling method

Cooling coil

Dummy plate and casting base

Yes

Material

Injection molded construction

 

Durable, leak proof environment for complete safety and long life

Electrical safety

Lid can only be fastened in one way

 

On removal, power is disconnected from buffer chamber

Rapid casting gel

Use casting dams

Warranty Information

All products we sell are covered solely by the manufacturer's warranty. Warranty information is included with the product and is subject to the conditions set forth by the manufacturer. We include such information in the product details for each item, when ever available. The manufacturer warrants their products are free from defects in material and workmanship. Repair or replacement may be issued for any product which is found to be defective under the terms of this warranty. Wholesale Point will assist with warranty issued within the first 14 days of product purchase. After that time the product manufacturer must be contacted directly to address all warranty issues. In many cases, the manufacturer can diagnose and resolve product concerns over the phone. For more information or to obtain contact information for the manufacturer, please call us +1(786) 420-2018.

Purchasing & Delivery

We take pride in making sure your order gets out quickly. We carefully check every item before shipping and we give extra care to our packaging to make sure every item arrives safely. Orders normally ship via UPS Ground, FedEx, or USPS within 1-2 days when in stock. Some items are drop shipped from the manufacturer and can take a little longer. For your convenience, whenever we ship an order, we electronically mail a shipping confirmation notice including the tracking number from UPS, FedEx, USPS, or a local delivery service.

Drop Ship Orders

Orders that are drop shipped from the manufacturer are subject to the manufacturer's availability and shipping schedule. Some items are special order or built-to-order and can take an average of 5-7 business days to ship. We make reasonable attempts to provide and display a shipping lead time on each product we sell. If you have any questions about our shipping policy or would like to know the availability or lead time on a specific drop ship product please feel free to contact us via our Contact Us Page. If you would like a drop shipped item expedited, please place your order by phone to guarantee your order can be expedited.

Payment Policy

We accept Visa, MasterCard, PayPal, American Express, and Discover.

Please note: When the checkout/customer details section asks for your "personal information", please enter your full name and billing address. The name and address you enter must match the information you have on file with your credit card provider, or the order will not be authorized.  If your credit card gets declined for any reason, a charge may show pending on your account.  This charge will fall off usually within 24-48 hours depending on your bank.

Login